𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Isothermal models for anode-supported tubular solid oxide fuel cells

✍ Scribed by Debangsu Bhattacharyya; Raghunathan Rengaswamy; Caine Finnerty

Book ID
108087810
Publisher
Elsevier Science
Year
2007
Tongue
English
Weight
836 KB
Volume
62
Category
Article
ISSN
0009-2509

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Anode Current Collecting Efficiency of T
Anode Current Collecting Efficiency of Tubular Anode-supported Solid Oxide Fuel Cells
✍ Y. Bai; C. Wang; C. Jin; J. Liu πŸ“‚ Article πŸ“… 2011 πŸ› John Wiley and Sons 🌐 English βš– 320 KB πŸ‘ 1 views

## Abstract Anode current collection points (ACCPs) were fabricated on the outside surface of a tubular anode‐supported solid oxide fuel cell (SOFC). The ACCPs were distributed axially along the SOFC tube with the distance between every adjacent two ACCPs the same. The effect of collecting current

Strength of Anode-Supported Solid Oxide
Strength of Anode-Supported Solid Oxide Fuel Cells
✍ A. Faes; H. L. Frandsen; A. Kaiser; M. Pihlatie πŸ“‚ Article πŸ“… 2011 πŸ› John Wiley and Sons 🌐 English βš– 797 KB

## Abstract Nickel oxide and yttria doped zirconia composite strength is crucial for anode‐supported solid oxide fuel cells, especially during transient operation, but also for the initial stacking process, where cell curvature after sintering can cause problems. This work first compares tensile an

Effect of cathode fabrication method on
Effect of cathode fabrication method on characteristics of anode-supported tubular solid oxide fuel cells
✍ Renzhu Liu; Chunhua Zhao; Junliang Li; Guoqiang Cai; Shaorong Wang; Tinglian Wen πŸ“‚ Article πŸ“… 2010 πŸ› Elsevier Science 🌐 English βš– 983 KB

We have adopted three different methods: dip-coating, brush pen painting, and ion-impregnating, to fabricate cathodes for anode-supported tubular solid oxide fuel cells; and studied the performances of the cells using cathodes fabricated by these three different methods. The cell with ion-impregnate