𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Strength of Anode-Supported Solid Oxide Fuel Cells

✍ Scribed by A. Faes; H. L. Frandsen; A. Kaiser; M. Pihlatie

Publisher
John Wiley and Sons
Year
2011
Tongue
English
Weight
797 KB
Volume
11
Category
Article
ISSN
1615-6846

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

Nickel oxide and yttria doped zirconia composite strength is crucial for anode‐supported solid oxide fuel cells, especially during transient operation, but also for the initial stacking process, where cell curvature after sintering can cause problems. This work first compares tensile and ball‐on‐ring strength measurements of as‐sintered anodes support. Secondly, the strength of anode support sintered alone is compared to the strength of a co‐sintered anode support with anode and electrolyte layers. Finally, the orientation of the specimens to the bending axis of a co‐sintered half‐cell is investigated. Even though the electrolyte is to the tensile side, it is found that the anode support fails due to the thermo‐mechanical residual stresses.

📜 SIMILAR VOLUMES

Anode Current Collecting Efficiency of T
Anode Current Collecting Efficiency of Tubular Anode-supported Solid Oxide Fuel Cells
✍ Y. Bai; C. Wang; C. Jin; J. Liu 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 320 KB 👁 1 views

## Abstract Anode current collection points (ACCPs) were fabricated on the outside surface of a tubular anode‐supported solid oxide fuel cell (SOFC). The ACCPs were distributed axially along the SOFC tube with the distance between every adjacent two ACCPs the same. The effect of collecting current

Microscale Modeling of an Anode-Supporte
Microscale Modeling of an Anode-Supported Planar Solid Oxide Fuel Cell
✍ P. Chinda; W. Wechsatol; S. Chanchaona; P. Brault 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 1014 KB

The solid oxide fuel cell (SOFC) is a highly efficient energy conversion system that transforms chemical energy to electrical energy and heat directly from gasified fuels by electrochemical reactions of fuels and oxidants. The supplied fuels can be hydrocarbon compounds such as CH 4 , C 2 H 6 , and

Double Perovskites as Anode Materials fo
Double Perovskites as Anode Materials for Solid-Oxide Fuel Cells.
✍ Yun-Hui Huang; Ronald I. Dass; Zheng-Liang Xing; John B. Goodenough 📂 Article 📅 2006 🏛 John Wiley and Sons ⚖ 9 KB 👁 2 views

## Abstract ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract, please click on HTML or PDF.