𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Anode supported solid oxide fuel cells (SOFC) by electrophoretic deposition

✍ Scribed by S.M. Majhi; S.K. Behura; S. Bhattacharjee; B.P. Singh; T.K. Chongdar; N.M. Gokhale; L. Besra

Book ID
113649239
Publisher
Elsevier Science
Year
2011
Tongue
English
Weight
751 KB
Volume
36
Category
Article
ISSN
0360-3199

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Strength of Anode-Supported Solid Oxide
Strength of Anode-Supported Solid Oxide Fuel Cells
✍ A. Faes; H. L. Frandsen; A. Kaiser; M. Pihlatie πŸ“‚ Article πŸ“… 2011 πŸ› John Wiley and Sons 🌐 English βš– 797 KB

## Abstract Nickel oxide and yttria doped zirconia composite strength is crucial for anode‐supported solid oxide fuel cells, especially during transient operation, but also for the initial stacking process, where cell curvature after sintering can cause problems. This work first compares tensile an

Anode Current Collecting Efficiency of T
Anode Current Collecting Efficiency of Tubular Anode-supported Solid Oxide Fuel Cells
✍ Y. Bai; C. Wang; C. Jin; J. Liu πŸ“‚ Article πŸ“… 2011 πŸ› John Wiley and Sons 🌐 English βš– 320 KB πŸ‘ 1 views

## Abstract Anode current collection points (ACCPs) were fabricated on the outside surface of a tubular anode‐supported solid oxide fuel cell (SOFC). The ACCPs were distributed axially along the SOFC tube with the distance between every adjacent two ACCPs the same. The effect of collecting current