✦ LIBER ✦

Investigation of the sorption properties of thin Ge–S–AgI films deposited on cantilever-based gas sensor

✍ Scribed by B. Monchev; D. Filenko; N. Nikolov; C. Popov; T. Ivanov; P. Petkov; I.W. Rangelow

Book ID: 106020424
Publisher: Springer
Year: 2007
Tongue: English
Weight: 541 KB
Volume: 87
Category: Article
ISSN: 1432-0630
DOI: 10.1007/s00339-007-3864-5

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The effect of water vapor on the electri

The effect of water vapor on the electrical properties and sensitivity of thin-film gas sensors based on tin dioxide

✍ V. I. Gaman; O. V. Anisimov; N. K. Maksimova; N. V. Sergeichenko; E. Yu. Sevast’ 📂 Article 📅 2008 🏛 Springer 🌐 English ⚖ 463 KB

Tin dioxide thin-film gas sensor prepare

Tin dioxide thin-film gas sensor prepared by chemical vapour deposition: Influence of grain size and thickness on the electrical properties

✍ L. Bruno; C. Pijolat; R. Lalauze 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 405 KB

Tin dioxide films are elaborated by a chemical vapour deposition (CVD) method. An accurate control of deposition parameters (temperature, total pressure, duration) so that appropriate annealing conditions (duration, temperature) can be used to modify the structural properties of the films : grain si

Effects of thermal annealing on the elec

Effects of thermal annealing on the electrical properties of tetraethylorthosilicate-based oxynitride films deposited on strained-Si 1 x Ge x

✍ Samanta, S K; Bera, L K; Benerjee, H D; Maiti, C K 📂 Article 📅 2002 🏛 Institute of Physics 🌐 English ⚖ 158 KB

Effect of microwave power and reactive g

Effect of microwave power and reactive gas ratio on the properties of silicon nitride thin films deposited by ECR PECVD

✍ Y. -C. Jeon; H. -Y. Lee; S. -K. Joo 📂 Article 📅 1992 🏛 Springer US 🌐 English ⚖ 396 KB

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB