## Abstract To improve the __in vivo__ resorption of an injectable calcium phosphate cement (CPC) for bone tissue engineering purposes, in previous experiments macroporosity was introduced by the __in situ__ degradation of incorporated gelatin microspheres. Gelatin microspheres are also suitable ca
Introduction of gelatin microspheres into an injectable calcium phosphate cement
โ Scribed by W. J. E. M. Habraken; L. T. de Jonge; J. G. C. Wolke; L. Yubao; A. G. Mikos; J. A. Jansen
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 734 KB
- Volume
- 87A
- Category
- Article
- ISSN
- 1549-3296
No coin nor oath required. For personal study only.
โฆ Synopsis
Abstract
For tissue engineered bone constructs, calcium phosphate cement (CPC) has a high potential as scaffold material because of its biocompatibility and osteoconductivity. However, in vivo resorption and tissue ingrowth is slow. To address these issues, microspheres can be incorporated into the cement, which will create macroporosity after in situ degradation. The goal of this study was to investigate the handling properties and degradation characteristics of CPC containing gelatin microspheres. Setting time and injectability were determined and an in vitro degradation study was performed. Samples were assayed on mass, compression strength, Eโmodulus, and morphology. A supplementary degradation test with gelatin microspheres was performed to investigate the influence of physical conditions inside the cement on microsphere stability. The gelatin microsphere CPCs were easy to inject and showed initial setting times of less than 3 min. After 12โweeks in vitro degradation no increase in macroporosity was observed, which was supported by the small mass loss and stabilizing mechanical strength. Even a clear densification of the composite was observed. Explanations for the lack of macroporosity were recrystallization of the cement onto or inside the gelatin spheres and a delayed degradation of gelatin microspheres inside the scaffold. The supplementary degradation test showed that the pH is a factor in the delayed gelatin microsphere degradation. Also differences in degradation rate between types of gelatin were observed. Overall, the introduction of gelatin microspheres into CPC renders composites with good handling properties, though the degradation characteristics should be further investigated to generate a macroporous scaffold. ยฉ 2008 Wiley Periodicals, Inc. J Biomed Mater Res, 2008
๐ SIMILAR VOLUMES
## Abstract Scaffolds for bone tissue engineering preferably should be mechanically stable, osteoconductive, biodegradable and porous. To comply with these characteristics, calcium phosphate cements (CPCs) with porcine (type A) gelatin microspheres were formulated. In this experiment, __in vitro__
## Abstract This study focused on the degradation properties of gelatin microparticles incorporated in calcium phosphate (CaP) cement and the subsequent effect of these composites on bone formation. Positively charged alkaline gelatin (type A) microparticles or negatively charged acidic gelatin (ty
## Abstract This __in vivo__ study evaluated the fixation of two types of titanium implants with the use of an injectable calciumโphosphate (CaP) cement. The cement was either used to create a cement mantle (Type A implant) or as an additive to pressโfit placed titanium plasma sprayed implants (Typ
## Abstract Calcium phosphate cement (CPC) that can be injected to form a scaffold in situ has promise for the repair of bone defects. However, its lowโstrength limits the CPC to nonโstressโbearing repairs. Fibrin glue (FG) with good sticking property and biocompatibility is possible used to reinfo
## Abstract The objective of this study was to investigate the efficacy of an injectable calcium phosphate cement/silk fibroin/human recombinant bone morphogenetic proteinโ2 composite (CPC/SF/rhBMPโ2) in an ovine interbody fusion model. Twentyโfour mature sheep underwent anterior lumbar interbody f