Initiation and propagation of stainless steel pitting corrosion under heat flux

✍ Scribed by T. Prošek; P. Novák

• Publisher: John Wiley and Sons
• Year: 2003
• Tongue: German
• Weight: 172 KB
• Volume: 54
• Category: Article
• ISSN: 0947-5117
• DOI: 10.1002/maco.200303760

✦ Synopsis

Abstract

An effect of heat flux on initiation and propagation of pitting corrosion of austenitic stainless steel in chloride environment has been studied using electrochemical and exposure methods. The experiments were performed at constant surface temperature of 60°C and heat flux from − 15 to + 74 kW m^−2^. The presence of heat flux from metal to solution shifted the breakdown potential towards noble values and lowered the pit density, whereas the pit propagation rate increased. Presence of maximum heat flux caused, in comparison with isothermal conditions, increase of the breakdown potential by approx. 100 mV, reduction of pit density by 30% and increase of the average pit depth by 40%. The positive effect of heat flux from metal to solution was given mainly by improving the protective ability of the passive film, as the amount of oxygen available at the metal surface increased. With a smaller significance, the effect of intensified mass transfer, which made accumulation of the chloride ions on the surface more difficult, occurred.