𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Initiation and early growth mechanisms of corrosion fatigue cracks in stainless steels

✍ Scribed by R. Mathis

Publisher
Springer
Year
1987
Tongue
English
Weight
821 KB
Volume
22
Category
Article
ISSN
0022-2461

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Corrosion fatigue crack initiation in 12
Corrosion fatigue crack initiation in 12% chromium stainless steel
✍ Ryuichiro Ebara πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 696 KB

Characteristics of corrosion fatigue failures of steam turbine blades derived from failure analysis are summarized. Then corrosion fatigue variables on corrosion fatigue strength of 12% chromium stainless steel are briefly reviewed. The paper emphasizes initiation and growth of corrosion pits in the

Initiation and early growth of fatigue c
Initiation and early growth of fatigue cracks in high strength steel
✍ J. Lankford πŸ“‚ Article πŸ“… 1977 πŸ› Elsevier Science 🌐 English βš– 661 KB

The micromechanics of crack initiation and early growth in 4340 steel is studied using the SEM, and it is found that growth is discontinuous and transgranular, with the distance between growth steps corresponding to the prior austenite grain size spread. The lowest observed growth rate is approximat

Environmental aspects of stress corrosio
Environmental aspects of stress corrosion crack growth in austenitic stainless steel
✍ Ing. B. Eremi; V. A. Maričev πŸ“‚ Article πŸ“… 1979 πŸ› John Wiley and Sons 🌐 German βš– 323 KB πŸ‘ 1 views

## Abstract Stress corrosion crack velocity and stress corrosion threshold stress intensity have been measured for 18Cr–10Ni–0,5Ti stainless steel in relation to environmental variations. These studies showed that both stage I and stage II growth rate dependence on K are influenced by environmental

Mechanism of corrosion fatigue crack pro
Mechanism of corrosion fatigue crack propagation in high strength steels
✍ Nakasa Keijiro; Takei Hideo; Itoh Hisashi πŸ“‚ Article πŸ“… 1983 πŸ› Elsevier Science 🌐 English βš– 922 KB

The crack propagation velocity in corroGon fatigue (du/dN), were measured on the Ni-Cr-Mo steel quenched and tempered at 473 or 773 K. The steel with high sensitivity to delayed failure reveals the largest (du/dN), under square load and the smaller (da/dN), under positive saw tooth load. The frequen