✦ LIBER ✦

Acoustic emission monitoring of corrosion fatigue crack growth in offshore steel

✍ Scribed by C. Thaulow; T. Berge

Publisher: Elsevier Science
Year: 1984
Weight: 523 KB
Volume: 17
Category: Article
ISSN: 0308-9126
DOI: 10.1016/0308-9126(84)90003-8

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Acoustic emission monitoring of fatigue

Acoustic emission monitoring of fatigue crack growth

✍ T.C. Lindley; I.G. Palmer; C.E. Richards 📂 Article 📅 1978 🏛 Elsevier Science ⚖ 977 KB

Acoustic emission monitoring of stress c

Acoustic emission monitoring of stress corrosion cracking

✍ W.W. Gerberich; R.H. Jones; M.A. Friesel; A. Nozue 📂 Article 📅 1988 🏛 Elsevier Science 🌐 English ⚖ 890 KB

Acoustic emissions of fatigue crack grow

Acoustic emissions of fatigue crack growth

✍ T.M. Morton; R.M. Harrington; J.G. Bjeletich 📂 Article 📅 1973 🏛 Elsevier Science 🌐 English ⚖ 661 KB

Detection of the onset of fatigue crack

Detection of the onset of fatigue crack growth in rail steels using acoustic emission

✍ M.N. Bassim; S.St. Lawrence; C.D. Liu 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 571 KB

The significance of stress corrosion cra

The significance of stress corrosion cracking in corrosion fatigue crack growth studies

✍ D. Rhodes; J.K. Musuva; J.C. Radon 📂 Article 📅 1981 🏛 Elsevier Science 🌐 English ⚖ 1005 KB

Abslraet-A model is proposed to account for interactions between fatigue and stress corrosion crack propagation mechanisms in appropriate corrosion fatigue conditions. Tests on an alloy steel, and both wrought and cast aluminium alloys, are reported. Despite the use of very simple coefficients in th

Mechanism of corrosion fatigue crack pro

Mechanism of corrosion fatigue crack propagation in high strength steels

✍ Nakasa Keijiro; Takei Hideo; Itoh Hisashi 📂 Article 📅 1983 🏛 Elsevier Science 🌐 English ⚖ 922 KB

The crack propagation velocity in corroGon fatigue (du/dN), were measured on the Ni-Cr-Mo steel quenched and tempered at 473 or 773 K. The steel with high sensitivity to delayed failure reveals the largest (du/dN), under square load and the smaller (da/dN), under positive saw tooth load. The frequen