𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Influence of the Surface Microgeometry upon the Corrosion Effect. I. Electrochemical corrosion

✍ Scribed by M. Parlapanski

Publisher
John Wiley and Sons
Year
1972
Tongue
German
Weight
439 KB
Volume
23
Category
Article
ISSN
0947-5117

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Influence of the surface microgeometry u
Influence of the surface microgeometry upon the corrosion effect — II. Distribution of the potential and current density with negligible electrode polarization
✍ M. Parlapanski 📂 Article 📅 1973 🏛 John Wiley and Sons 🌐 German ⚖ 290 KB

## Abstract The problem is dealt with in terms of two models: (1) Metal surface with curved elements of the same metal protruding therefrom, these elements acting as anodes and the potential distribution being a function of the regularity of the curvature (semi‐spherical, semi‐ellipsoidal); (2) thi

Influence of heat flux and surface tempe
Influence of heat flux and surface temperature on the intergranular corrosion of stainless steel
✍ T. Prošek; P. Novák; J. Bystrianský 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 German ⚖ 258 KB 👁 1 views

## Abstract The exposure tests followed by metallographic evaluation and the electrochemical reactivation measurements in double‐loop (DL‐EPR) modification were used for investigation of the influence of non‐boiling heat transfer on initiation and rate of propagation of intergranular corrosion (IGC

Influence of surface modification on the
Influence of surface modification on the in vitro corrosion rate of magnesium alloy AZ31
✍ Joy E. Gray-Munro; Christine Seguin; Michael Strong 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 350 KB 👁 1 views

## Abstract In recent years, magnesium alloys have been proposed as a new class of metallic bioabsorbable implant material. Unfortunately, the production of hydrogen gas and an increase in alkalinity are both by‐products of the degradation process of these materials. This necessitates the developme

The effects of various formwork surfaces
The effects of various formwork surfaces on the corrosion performance of reinforcing steel in concrete
✍ S. Subaşı; M. Arslan; G. Durmuş 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 German ⚖ 448 KB 👁 1 views

## Abstract In this study, the effects of various formwork surfaces on the corrosion performance of reinforcing steel in concrete were examined. For this purpose, seven formwork surfaces from populus nigra, pinus silvestris, steel sheet, and four of plywoods were prepared. Three of the plywood form