✦ LIBER ✦

Hydroxyapatite coatings on titanium dioxide thin films prepared by pulsed laser deposition method

✍ Scribed by Yoshiaki Suda; Hiroharu Kawasaki; Tamiko Ohshima; Shouta Nakashima; Syuichi Kawazoe; Tetsuya Toma

Book ID: 108289056
Publisher: Elsevier Science
Year: 2006
Tongue: English
Weight: 214 KB
Volume: 506-507
Category: Article
ISSN: 0040-6090
DOI: 10.1016/j.tsf.2005.08.125

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

ZnO thin films prepared by pulsed laser

ZnO thin films prepared by pulsed laser deposition

✍ M.G. Tsoutsouva; C.N. Panagopoulos; D. Papadimitriou; I. Fasaki; M. Kompitsas 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 487 KB

Ferrimagnetic thin films prepared by pul

Ferrimagnetic thin films prepared by pulsed laser deposition

✍ M. Guyot; A. Lisfi; R. Krishnan; M. Porte; P. Rougier; V. Cagan 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 395 KB

KTiOAsO4 Thin Films Prepared by Pulsed L

KTiOAsO4 Thin Films Prepared by Pulsed Laser Deposition

✍ Yu Liao; Xiu Wang 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 37 KB 👁 2 views

A pulsed Nd:YAG Laser was used to evaporate solid targets of KTiOAsO 4 (KTA) at power densities of 0.6 to 2.0×10 9 W/cm 2 . KTA thin films were deposited on glass, Si (100). After proper annealing treatment, single phase, (orthorh-ombic) polycrystalline KTA thin films were obtained. Some propitious

Titanium dioxide thin films prepared by

Titanium dioxide thin films prepared by chemical vapor deposition

✍ Toshiro Maruyama; Susumu Arai 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 254 KB

BiSrCaCuO superconducting thin films pre

BiSrCaCuO superconducting thin films prepared by pulsed laser evaporation deposition

✍ J. Perrière; E. Fogarassy; G. Hauchecorne; X.Z. Wang; C. Fuchs; F. Rochet; I. Ro 📂 Article 📅 1988 🏛 Elsevier Science 🌐 English ⚖ 251 KB

Transparent conductive CuI thin films pr

Transparent conductive CuI thin films prepared by pulsed laser deposition

✍ Zhu, B. L. ;Zhao, X. Z. 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 450 KB

## Abstract Cuprous iodide (CuI) thin films were prepared by a pulsed laser deposition (PLD) technique, and the effects of the laser energy and substrate temperature on the structure and optical–electrical properties were investigated by X‐ray diffraction (XRD), scanning electronic microscopy (SEM)