✦ LIBER ✦

Hydrodynamic seal for a rotating sleeve engine

Publisher: Elsevier Science
Year: 2005
Tongue: English
Weight: 369 KB
Volume: 2005
Category: Article
ISSN: 1350-4789
DOI: 10.1016/s1350-4789(05)00525-8

No coin nor oath required. For personal study only.

✦ Synopsis

This patent describes a metal gasket that has an S-shaped longitudinal section. Metal rings may be fitted into the recesses in the section. It is claimed that the seal ring is not elastically deformed, even under a high compressive load, thus reducing fatigue failures and avoiding potential damage under high pressure.

📜 SIMILAR VOLUMES

Seal for a turbine engine

📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 219 KB

This patent describes a device for use as part of a centrifuge for biological samples. It is designed to allow fluid passage into and out of individual chambers of the centrifuge and provide thorough emptying of the chambers. It uses what are described as face seals but from the limited detail provi

Seal for a rotating member

📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 243 KB

Flexible seal for a gas turbine engine

📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 161 KB

seal has a moulded wave profile, or a series of semicircular arches that contact the groove wall. A number of different patterns are illustrated.

Improved magnetic seal for a rotating sh

Improved magnetic seal for a rotating shaft

📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 135 KB

include a deformable portion interconnected to a vapour barrier portion by way of a mechanical or adhesive interlocking connection. This deformable portion can be made from an elastomeric material. The vapour barrier portion can be formed from a wide variety of materials that inhibit permeation of t

Process for producing a rotating/sliding

Process for producing a rotating/sliding seal

📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 122 KB

inter-lip spaces.

Non-contact seal for a gas-turbine engin

Non-contact seal for a gas-turbine engine

📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 410 KB

basic composition of the raw material is composed of 16-28 wt% of NBR, serving as the rubber; 4-8 wt% of an aramid fibre, serving as the reinforcing fibre; 10-20 wt% of a needlelike dolomite, serving as the reinforcing fibre; 8-20 wt% of silica particles, serving as the filler; and the balance, an i