✦ LIBER ✦

Flexible seal for a gas turbine engine

Publisher: Elsevier Science
Year: 2010
Tongue: English
Weight: 161 KB
Volume: 2010
Category: Article
ISSN: 1350-4789
DOI: 10.1016/s1350-4789(10)70043-x

No coin nor oath required. For personal study only.

✦ Synopsis

seal has a moulded wave profile, or a series of semicircular arches that contact the groove wall. A number of different patterns are illustrated.

📜 SIMILAR VOLUMES

Gas-turbine engine seal

📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 218 KB

## PATENTS tain close alignment with the shaft. A series of these shoes circumferentially make up the entire seal. There is a secondary seal to prevent leakage around the outside of the shoe, past the spring.

Non-contact seal for a gas-turbine engin

Non-contact seal for a gas-turbine engine

📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 410 KB

basic composition of the raw material is composed of 16-28 wt% of NBR, serving as the rubber; 4-8 wt% of an aramid fibre, serving as the reinforcing fibre; 10-20 wt% of a needlelike dolomite, serving as the reinforcing fibre; 8-20 wt% of silica particles, serving as the filler; and the balance, an i

Seal for a turbine engine

📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 219 KB

This patent describes a device for use as part of a centrifuge for biological samples. It is designed to allow fluid passage into and out of individual chambers of the centrifuge and provide thorough emptying of the chambers. It uses what are described as face seals but from the limited detail provi

Gas turbine engine interstage seal assem

Gas turbine engine interstage seal assembly

📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 440 KB

Seal for a platform in a turbine engine

Seal for a platform in a turbine engine rotor

📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 154 KB

Applicant: Dresser-Rand Co

Seal for a gas turbine combustor

📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 91 KB

## Methods and apparatuses for generating a seal between a conduit and a reservoir well Applicant: SmithKline Beecham Corporation, USA This patent is concerned with the sealing of microbiological samples, and the prevention of carry over between samples during operations, such as sampling with a p