✦ LIBER ✦

High expansion metal sealing system

Publisher: Elsevier Science
Year: 2011
Tongue: English
Weight: 147 KB
Volume: 2011
Category: Article
ISSN: 1350-4789
DOI: 10.1016/s1350-4789(11)70161-1

No coin nor oath required. For personal study only.

✦ Synopsis

April 2011

Sealing Technology

15

the pipe connection work and quality of the connection by eliminating the need to form a flare on the pipe. The pipe joint consists of a flare joint body (1), a cap nut (2) and a stop ring (3). The rounded, pressure-contact sloped surface (32) of the stop ring (3) makes contact, under pressure, with a diameter-reducing tapered section (5) at the tip of the flare joint body (1) to form a seal. The stop ring (3) is provided integrally with a claw section (36) that bites into the outer peripheral surface (10A) of the straight tip (10) of the pipe.

📜 SIMILAR VOLUMES

High expansion down-hole seal

📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 224 KB

design also enables a fuel cell with a thinner structure to be built. The gasket may be made of a silicone-based elastomer.

Metal valve stem seal and sealing system

📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 126 KB

Metal seal withstands high deflection

📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 104 KB

Select the thinnest gasket possible. The only advantage of thicker gaskets is their ability to conform to flange irregularities. Irregularities should be reduced, to facilitate the use of a thin gasket.

Advanced sealing system for high pressur

Advanced sealing system for high pressure valves

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 101 KB

## Dynamic sealing power consumption is greatly reduced through the optimization of the friction face width and material selection. Specific attention to detail, llke surface finish underneath the O-ring and design of the antlrotation system, guarantees an increased service life. Lack of space ar

Compliant high-temperature seals for cer

Compliant high-temperature seals for ceramic-to-metal sealing

📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 248 KB

Metal-to-metal seal concept achieves hig

Metal-to-metal seal concept achieves high temperatures

📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 268 KB

Garlock Sealing technologies has announced the development of a new metal-to-metal sealing concept that permits service temperatures of 1000°C to be achieved with low seating loads. The development of the Ultraseal was featured in the April edition of Sealing Technology. The seal construction is ba