𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Fractography of borosilicate glass tested in three- and four-point bending

✍ Scribed by M.H. Dielhof; L.J.M.G. Dortmans; G. de With

Publisher
Elsevier Science
Year
1993
Tongue
English
Weight
723 KB
Volume
12
Category
Article
ISSN
0955-2219

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Influence of bending rotations on three
Influence of bending rotations on three and four-point bend end notched flexure tests
✍ A. Arrese; F. Mujika πŸ“‚ Article πŸ“… 2008 πŸ› Elsevier Science 🌐 English βš– 286 KB

Delamination Three-point end notched flexure test Four point end notched flexure test Mode II Energy release rate a b s t r a c t It has been experimentally observed that mode II critical energy release rate (G IIC ) values determined by four-point end notched flexure test and three-point end notche

In-plane shearing stress–strain response
In-plane shearing stress–strain response of glass-fiber-reinforced composites as determined from four-point bending tests
✍ E. Sideridis; E. Kyriazi πŸ“‚ Article πŸ“… 1995 πŸ› John Wiley and Sons 🌐 English βš– 430 KB πŸ‘ 2 views

In this article an experimental study to determine the longitudinal (or in-plane) shearing stress-strain response of a unidirectional fiber-reinforced composite material is presented. The test method used is the four-point bending of a 245" off-axis glass-fiber-reinforced laminate. Although a lamina

269. Test geometry and its effect on gra
269. Test geometry and its effect on graphite flexural strengths in four-point bending
✍ S.F. Lewallen; E.G. Morris πŸ“‚ Article πŸ“… 1982 πŸ› Elsevier Science 🌐 English βš– 126 KB

An evaluation of variations in the flexural strength of graphite determined in four-point bending tests has shown geometrical factors to have substantial influences on the measurement. Among the factors evaluated were the specimen cross-sectional geometry, ratio of load/support span to specimen thic