✦ LIBER ✦

Folded monopole antenna for handheld devices

✍ Scribed by Qinjiang Rao; Geyi Wen

Publisher: John Wiley and Sons
Year: 2010
Tongue: English
Weight: 748 KB
Volume: 52
Category: Article
ISSN: 0895-2477
DOI: 10.1002/mop.24930

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

This article presents a new multiband antenna for handheld devices. The antenna consists of three branches of folded monopoles, and it is designed to operate at most application bands used currently, such as GSM 850/900/1800/1900, UMTS2100, and WLAN 5GHz. The simulated and measured results validate the proposed design. The proposed antenna has better performances than other embedded antenna designs of the same maximum dimension. © 2009 Wiley Periodicals, Inc. Microwave Opt Technol Lett 52: 421–425, 2010; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.24930

📜 SIMILAR VOLUMES

A printed folded Koch monopole antenna f

A printed folded Koch monopole antenna for wireless devices

✍ G. Tsachtsiris; C. Soras; M. Karaboikis; V. Makios 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 380 KB 👁 1 views

## Abstract A novel folded Koch monopole antenna printed over a wireless device's ground plane is presented. Due to its favorable characteristics, the element was further considered for the implementation of a two‐branch diversity system and proved to achieve a good diversity performance under both

A broadband folded planar monopole anten

A broadband folded planar monopole antenna for mobile phones

✍ Gwo-Yun Lee; Shih-Huang Yeh; Kin-Lu Wong 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 145 KB

## Abstract This article presents a broadband folded planar monopole antenna suitable for DCS (1710–1880 MHz), PCS (1850–1990 MHz), UMTS (1920–2170 MHz), and WLAN (2400–2484 MHz) operations for mobile phones. In addition to the broadband operation, the proposed folded monopole has compact dimension

Hex-band antenna for slim handheld devic

Hex-band antenna for slim handheld device applications

✍ Shirook M. Ali; Houssam Kanj 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 272 KB

## Abstract In this article, we present an approach and design of a small antenna for slim handheld device applications. The basic antenna element is the monopole. The small size and the reduced effective antenna height are achieved from two folding approaches of this monopole. The first is in a th

A low-profile folded planar monopole ant

A low-profile folded planar monopole antenna for wireless communication

✍ Shun-Yun Lin 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 110 KB

## Abstract This paper presents a novel design for a low‐profile planar monopole antenna. The proposed antenna is a rectangular planar monopole with folded end. Its total height is about 0.12 λ~0~ (the free‐space wavelength of the lowest operating frequency of the antenna), which is lower than othe

Coupled monopole antenna design for mult

Coupled monopole antenna design for multiband handset devices

✍ S. Risco; J. Anguera; A. Andújar; A. Pérez; C. Puente 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 581 KB

## Abstract A low profile planar antenna, comprising a driven element coupled with one or more parasitic elements is proposed. The design is suitable to be used into a handheld device due to the antenna reduced dimensions (33 × 15 × 1 mm^3^). To facilitate the integration of other components, such

Folded monopole LC-loaded antenna and it

Folded monopole LC-loaded antenna and its polarization reconfigurability

✍ S. H. Kim; J. H. Jang 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 556 KB

## Abstract Folded monopole antenna loaded with the distributed inductors and capacitors is designed and characterized.The inductors and capacitor are realized by utilizing meanderline strips and the interdigitated structure, respectively. The resonance characteristics of the antenna are essentiall