Fluidization of solids with CO2 at pressures from ambient to supercritical
β Scribed by Antonio Marzocchella; Piero Salatino
- Publisher
- American Institute of Chemical Engineers
- Year
- 2000
- Tongue
- English
- Weight
- 196 KB
- Volume
- 46
- Category
- Article
- ISSN
- 0001-1541
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
Beds of two granular materials belonging to groups AβB and B of the Geldart classification of powders were fluidized by carbon dioxide at 35Β°C and at 1 to 80 bar. Within this pressure interval, spanning from subcritical to supercritical conditions, the fluid density changes from the values typical of dilute gases to those of liquids. The hydrodynamic behavior of the bed changes accordingly. The bed behavior was investigated by visual inspection of the bed and by analysis of the time series of the pressure drop across the bed and of the heatβtransfer coefficient between the bed and a hot wire probe. The boundaries between different captive fluidization regimesβincipient fluidization, onset of bubbling, and the incipient and fully established turbulent regimeβwere mapped in gas superficial velocity vs. fluid density phase planes for the two granular materials investigated.
π SIMILAR VOLUMES
Spectra emitted from 0.15 CO-N; solids escited with high encrg elccirons at 4 R show evidence for rcsonant transfer of vibrational &qry from highly excited vibrational levels of N, to Coin the process,Nz(XI z'&, v) + CO(u = 0) --F N,(X'ZL, Y -1) + C0(11= 1) + phonons. Enqg transfer from levels with
Ignition characteristics of AP-based composite solid propellants that contained either HMX or RDX, were investigated using a CO2 laser at relatively low heat flux and subatmospheric pressures, in order to simulate space environments and also simplify our understanding of the nature of ignition pheno
New measurements of the amount-of-substance density of pure gaseous CO2 in the temperature range 329 K to 698 K at pressures from 3 MPa to 34 MPa are reported. The results have been obtained by using a fully automated isochoric instrument and their average uncertainty is estimated to be about 20.05
Single-crystal high-pressure (HP) crystallography is a growing field, but studies on organometallics are relatively rare despite the many interesting behaviors inferred from HP spectroscopy. [1] Molecular solids, being held together by [