Copper can be determined spectrophotometrically at 343, 370 and 545 nm, based on the reaction of copper(I1) and bis(acetylacetone)ethylenediimine after extraction of the chelate into chloroform. The calibration graphs were linear up to 20 pg ml-' copper at 343 nm, 80 pg ml-' copper at 370 nm and 200
Flow injection extraction spectrophotometric determination of copper using bis(acetylacetone)ethylenediimine
✍ Scribed by N. Chimpalee; D. Chimpalee; S. Lohwithee; L. Nakwatchara; D.Thorburn Burns
- Book ID
- 107710415
- Publisher
- Elsevier Science
- Year
- 1996
- Tongue
- English
- Weight
- 336 KB
- Volume
- 331
- Category
- Article
- ISSN
- 0003-2670
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
Copper can be determined spectrophotometrically at 600 nm based on the reaction of copper(H) and bis(cyclohexanone)oxalyldihydrazone using flow-injection analysis. The carrier stream was distilled water and the reagent streams were 27% (w/v) citric acid solution, 37% (v/v> ammonia solution and 0.18%
In the proposed procedure, the determination of salbutamol with Folin-Ciocalteau reagent (FC) using a flow injection analysis technique (FIA) with spectrophotometric detection at 750 nm is described. The lab-made FIA system consisted of a peristaltic pump Gilson Minipulse 3 equipped with Tygon tubes