A novel separation-based fiber-optic sensor SBFOS with potential for industrial process and waste analyses is described. The SBFOS is a chemical monitor that integrates the separation selectivity afforded by capillary electrophoresis with the remote and high sensitivity capabilities of laser-induced
Fiber optic sensors for noncontact process monitoring in a microwave environment
✍ Scribed by B. Degamber; G. F. Fernando
- Publisher
- John Wiley and Sons
- Year
- 2003
- Tongue
- English
- Weight
- 215 KB
- Volume
- 89
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
This article reports on the design and development of two fiber optic sensing systems that facilitate the cure monitoring of an epoxy/amine thermoset in a microwave oven. First, the design, construction, and evaluation of a fiber optic probe were necessary so that noncontact diffuse reflectance spectra could be obtained during the curing of the resin in a microwave oven. Second, a low‐cost, disposable fiber optic temperature sensor had to be developed for use in the microwave oven because the use of conventional metal‐based thermocouples was not possible. The deployment of the two sensor systems was demonstrated successfully. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3868–3873, 2003
📜 SIMILAR VOLUMES
The prototype of a portable fiber-optic sensor system for monitoring apolar hydrocarbons in groundwater or industrial wastewater is presented. This sensor system can be used for quantitative in situ analysis of organic pollutants like chlorinated hydrocarbons, aromatic hydrocarbons, or fuels in a br
## Abstract Non‐invasive, simultaneous optical monitoring of oxygen and pH during bacterial cultivation in 24‐well microplates is presented using an integrated dual sensor for dissolved oxygen and pH values. The dual sensor is based on oxygen‐sensitive organosilica microparticles and pH‐sensitive m