𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Fabrication and mechanical properties of hydroxyapatite-alumina composites

✍ Scribed by Horng Yih Juang; Min Hsiung Hon


Publisher
Elsevier Science
Year
1994
Tongue
English
Weight
536 KB
Volume
2
Category
Article
ISSN
0928-4931

No coin nor oath required. For personal study only.


📜 SIMILAR VOLUMES


Fabrication and mechanical and tissue in
✍ Shunji Yunoki; Toshiyuki Ikoma; Akio Tsuchiya; Akira Monkawa; Kazushi Ohta; Shin 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 389 KB

## Abstract This study investigated the effects of the three‐dimensional (3‐D) pore structure of a porous hydroxyapatite/collagen (HAp/Col) composite on their mechanical properties and __in vivo__ tissue ingrowth. The unique 3‐D pore structure, comprising unidirectionally interconnected pores, was

Hydroxyapatite whiskers provide improved
✍ Roeder, Ryan K. ;Sproul, Michael M. ;Turner, Charles H. 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 577 KB

## Abstract Synthetic hydroxyapatite (HA) whiskers have been utilized as a new, biocompatible reinforcement for orthopedic biomaterials. High‐density polyethylene (HDPE) was reinforced with either the synthesized HA whiskers or a commercially available spherical HA powder using a novel powder proce

Polyoxymethylene/polyurethane/alumina te
✍ S. Siengchin; J. Karger-Kocsis; G. C. Psarras; R. Thomann 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 679 KB

## Abstract Ternary composites composed of polyoxymethylene (POM), polyurethane (PU), and boehmite alumina were produced by melt blending with and without latex precompounding. Latex precompounding served for the predispersion of the alumina particles. The related masterbatch (MB) was produced by m

Predictive modeling of the mechanical pr
✍ Bala?, Igor ;Uskokovi?, Petar S. ;Aleksi?, Radoslav ;Uskokovi?, Dragan 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 660 KB

## Abstract The influence of particle geometry and volume fraction on the mechanical properties of a hydroxyapatite (HAp) particulate reinforced polymer (poly‐L‐lactide and collagen) matrix composite was investigated through finite‐element (FE) analysis. For cube‐shaped (near sharp and curved corne