## Abstract The influence of particle geometry and volume fraction on the mechanical properties of a hydroxyapatite (HAp) particulate reinforced polymer (poly‐L‐lactide and collagen) matrix composite was investigated through finite‐element (FE) analysis. For cube‐shaped (near sharp and curved corne
Hydroxyapatite whiskers provide improved mechanical properties in reinforced polymer composites
✍ Scribed by Roeder, Ryan K. ;Sproul, Michael M. ;Turner, Charles H.
- Publisher
- John Wiley and Sons
- Year
- 2003
- Tongue
- English
- Weight
- 577 KB
- Volume
- 67A
- Category
- Article
- ISSN
- 0021-9304
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Synthetic hydroxyapatite (HA) whiskers have been utilized as a new, biocompatible reinforcement for orthopedic biomaterials. High‐density polyethylene (HDPE) was reinforced with either the synthesized HA whiskers or a commercially available spherical HA powder using a novel powder processing technique that facilitated uniform dispersion of the reinforcements in the matrix prior to compression molding. Composites were processed for up to 60 vol % HA whiskers and up to 50 vol % spherical HA. The mechanical properties of the new composite biomaterials were examined by uniaxial tensile tests. As expected, increased volume fraction of either reinforcement type over 0–50 vol % resulted in increased elastic modulus, a maximum in ultimate tensile stress, and decreased work to failure. Composites reinforced with HA whiskers had higher elastic modulus, ultimate tensile strength, and work to failure relative to composites reinforced with spherical HA. Thus, HA whisker‐reinforced HDPE composites possessed improved mechanical properties over those reinforced with spherical HA. HA whisker‐reinforced composites were anisotropic due to alignment of the whiskers in the matrix during processing. © 2003 Wiley Periodicals, Inc. J Biomed Mater Res 67A: 801–812, 2003
📜 SIMILAR VOLUMES
This paper report on the development of thermoplastic elastomer composite reinforced with 20 vol.% kenaf fibre. Two types of impact modifier were blended with polypropylene (PP) namely; thermoplastic natural rubber (TPNR) and polypropylene/ethylene-propylene-diene-monomer (PP/EPDM). Both composites