𝔖 Bobbio Scriptorium
✦   LIBER   ✦

EXPERIMENTAL VALIDATION OF THE TWINS PREDICTION PROGRAM FOR ROLLING NOISE, PART 2: RESULTS

✍ Scribed by D.J. Thompson; P. Fodiman; H. Mahé


Publisher
Elsevier Science
Year
1996
Tongue
English
Weight
329 KB
Volume
193
Category
Article
ISSN
0022-460X

No coin nor oath required. For personal study only.

✦ Synopsis


Two extensive measurement campaigns have been carried out to validate the TWINS prediction program for rolling noise, as described in part 1 of this paper. This second part presents the experimental results of vibration and noise during train pass-bys and compares them with predictions from the TWINS program. The model is found to give quite reliable results provided that care is taken with the input data, especially that concerning the roughness and the attenuation of vibration along the rail. It is found that the model consistently predicts overall levels about 2 dB(A) higher than the measured values. This effect can be attributed to simplifications in the model for the propagation of sound from source to receiver. On the other hand spectral results reveal a large spread in each one-third octave band (standard deviations of up to 5 dB). This can be identified with a similar level of uncertainty concerning the actual roughness acting at the contact patch, due to uncertainties in the position of the contact patch and variations between the roughness of nominally similar wheels and rail sections.


📜 SIMILAR VOLUMES


Tillage Tool Design by the Finite Elemen
✍ Abdul Mounem Mouazen; Miklós Neményi; Helmut Schwanghart; Martin Rempfer 📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 228 KB

Laboratory soil bin tests of subsoiler cutting in a sandy loam soil were carried out in order to validate the results obtained from the finite element calculations reported in Part 1 of this study. Measured results of subsoiler draught force and soil failure dimension taken on the surface were prese

Materials for temperatures above 1500°C
✍ K. Bundschuh; M. Schütze 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 German ⚖ 878 KB

The topic ªMaterials for temperatures above 1500 8C in oxidizing atmospheresº is discussed in a 3 part publication. In the first part a literature survey had been performed leading to the conclusion that either particle or fiber reinforced MoSi 2 -based materials or RSiC coated with a MoSi 2 -based

How to Predict Conformations Accessible
✍ Stefan Beyreuther; Johannes Hunger; Sven Cunskis; Tammo Diercks; Axel Frick; Eck 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 809 KB

Molybdenum(CO) 3 compounds / Conformational ensembles in solution / Modelling NOE contacts / MM2\* Force field calculations / Packing forces NMR-NOE analysis of the three compounds (RRS/SSR)-observed and calculated NOE distances is highly satisfactory in each case (rms = 0.2 A ˚to 0.3 A ˚). By a st