Materials for temperatures above 1500°C in oxidizing atmospheres. Part II: Experimental results on the oxidation of MoSi2 composites and coated RSiC
✍ Scribed by K. Bundschuh; M. Schütze
- Publisher
- John Wiley and Sons
- Year
- 2001
- Tongue
- German
- Weight
- 878 KB
- Volume
- 52
- Category
- Article
- ISSN
- 0947-5117
No coin nor oath required. For personal study only.
✦ Synopsis
The topic ªMaterials for temperatures above 1500 8C in oxidizing atmospheresº is discussed in a 3 part publication. In the first part a literature survey had been performed leading to the conclusion that either particle or fiber reinforced MoSi 2 -based materials or RSiC coated with a MoSi 2 -based layer are suitable for applications at such high temperatures. In the present part such material systems are investigated experimentally at 1500 and 1600 8C with respect to their oxidation resistance in air. Particular interest was given to the influence of the Mo 5 Si 3 content in MoSi 2 and the influence of second phase particles in MoSi 2 consisting of ZrB 2 and SiC. Furthermore, the oxidation resistance of several dip-coatings on RSiC which were manufactured from a polysiloxane precursor by subsequent pyrolysis were also investigated. Part III which reports about ªcontact corrosionº between different materials at these temperatures will follow in the next issue.
Das
Thema ¹Werkstoffe fu Èr oxidierende Atmospha Èren bei Temperaturen oberhalb 1500 8Cª wird in drei Teilpublikationen vorgestellt. Im ersten Teil [1] war eine Literaturrecherche durchgefu Èhrt worden, die zu dem Schluû kam, daû entweder Teilchen-oder faserversta Èrktes MoSi 2 -basiertes Material oder RSiC, das mit einer MoSi 2 -basierten Schicht versehen wird, fu Èr die Anwendung bei solch hohen Temperaturen geeignet sind. Im vorliegenden zweiten Teil wurden solche Werkstoffsysteme bei Temperaturen von 1500 und 1600 8C in Bezug auf ihre Oxidationsbesta Èndigkeit in Luft untersucht. Besonderes Interesse galt dem Einfluû des Mo 5 Si 3 -Gehalts in MoSi 2 und dem Einfluû von Zweitphasen in MoSi 2 , bestehend aus ZrB 2 und SiC. Daru Èber hinaus wurde die Oxidationsbesta Èndigkeit verschiedener Tauchbeschichtungen auf RSiC untersucht, die aus einem Polysiloxan-Precursor durch Pyrolyse hergestellt worden waren. Der dritte Teil zur ¹Kontaktkorrosionª erscheint im na Èchsten Heft.