## Abstract The present work is aimed to evaluate the effects of a surface modification process on the biocompatibility of three vanadium‐free titanium alloys with biomedical applications interest. Chemical composition of alloys investigated, in weight %, were Ti‐7Nb‐6Al, Ti‐13Nb‐13Zr, and Ti‐15Zr‐
Evaluation of the biocompatibility of titanium-tantalum alloy versus titanium
✍ Scribed by Prigent, H. ;Pellen-Mussi, P. ;Cathelineau, G. ;Bonnaure-Mallet, M.
- Publisher
- John Wiley and Sons
- Year
- 1998
- Tongue
- English
- Weight
- 268 KB
- Volume
- 39
- Category
- Article
- ISSN
- 0021-9304
No coin nor oath required. For personal study only.
✦ Synopsis
To evaluate the biocompatibility of a new titanium-tantalum alloy, with qualities superior to titanium alone, for use in oral implantology, fibroblast and epithelial cell lines were grown on plastic, titanium, copper, and titanium-tantalum supports. Studies using scanning electron microscopy, flow cytometry, and cytotoxicity assays were conducted to compare the different supports. Scanning electron microscopic observations showed high densities of fibroblasts and epithelial cells with well-developed attachment systems in the form of cytoplasmic projections. Cell densities were lower on titanium and titanium-tantalum surfaces than on plastic. Cell numbers, as determined by cytotoxicity assays, were significantly higher on plastic than on titanium or titanium-tantalum surfaces while fibroblasts proliferated better than epithelial cells on both metal surfaces. Flow cytometric analyses of cell cycles did not reveal any significant variations in the distribution of cells among the cycle phases on the three materials. We found no differences with regard to the parameters studied between titanium and the titanium-tantalum alloy.
📜 SIMILAR VOLUMES
## Abstract In this paper, the electrochemical behaviour of the titanium and Ti‐6Al‐7Nb alloy in artificial saliva (Tani&Zucchi and Carter–Brugirard), ion release tests and in vitro biocompatibility of human osteoblasts (HOB) were studied. Titanium and its implant Ti‐6Al‐7Nb alloy present self‐pass
## Abstract Titanium exhibits a good corrosion resistance in oxidizing acids and neutral media but it is severely attacked in reducing acids. On the contrary, tantalum presents an excellent resistance in both oxidizing and reducing acids, but its high cost limits its use to very aggressive conditio
The binary titanium-5wt% aluminum alloy (VT-5) is a commonly used Russian grade of titanium. It has much higher strength compared to the well known commercially pure titanium grades; at the same time it exhibits reasonable toughness values. Hot rolled bars of this grade were to be manufactured and s
Nickel-titanium shape memory alloy (Nitinol) has properties that could be very useful in surgical applications. Thermal shape memory, superelasticity, and high damping properties make such alloys behave differently compared to other implant metals. There has previously been a lack of sufficient evid
## Abstract Implant loosening is an unresolved complication associated with prosthetics. Previous studies report improved osseointegration with hydroxyapatite (HA) or tri‐calcium phosphate coatings. Unfortunately, the brittleness and low strength of these coatings in adhesion to the implant or inte