𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Entropy analysis of wet-surface cooling system for air flow

✍ Scribed by Ari Seppälä; Markku J. Lampinen

Publisher
John Wiley and Sons
Year
1998
Tongue
English
Weight
171 KB
Volume
22
Category
Article
ISSN
0363-907X

No coin nor oath required. For personal study only.

✦ Synopsis

A wet-surface heat-exchanger, where the effluent air is moistened, is analysed according to a thermodynamic theory and data of experimental tests. An entropy generation function, which takes into account the changes of temperature and humidity of air, is derived. The analyses show that it is thermodynamically possible, without any cooling machine, to achieve extremely large temperature drops. With certain parameters the system results in a maximum rate of entropy generation which is used to analyse differences between two different methods of spraying the moistening water. Approximal limits for the efficient working fluid mass flow value are also given.

📜 SIMILAR VOLUMES

98/04140 Entropy analysis of wet-surface
98/04140 Entropy analysis of wet-surface cooling system for air flow
📂 Article 📅 1998 🏛 Elsevier Science ⚖ 202 KB

13 Space heating and cooling ## 98104134 Use of pitch-dolomite refractories in steelmaking ladles Chumarin, B. A. et al. Metalhug., 1997, (7) 13-16. (In Russian) Using pitch binder, lime-periclase refractories and the technology for lining ladles with the refractories were developed and implemente

97/03152 Acceptance test for air conditi
97/03152 Acceptance test for air conditioning systems. Performance acceptance test of cooling surfaces for rooms
📂 Article 📅 1997 🏛 Elsevier Science ⚖ 178 KB

This forms a mixture of the pre-ceramic polymer and interface materialcoated reinforcing fibres. moulding an exhaust manifold-shaped structure from the mixture by placing the mixture on at least a portion of the castahle material, and firing the structure. The manifolds produced are resistant to ero

Flow system based on sequential delivery
Flow system based on sequential delivery of air-sandwiched solutions into a micro cell for spectrophotometric catalytic analysis
✍ Susumo Kawakubo; Masaaki Iwatsuki; Tsutomu Fukasawa 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 647 KB

An air-sandwiched sample, reagent solutions and water with a total volume of 317 PI are sequentially delivered by air carrier through PTFE tubing of 1 mm i.d. into a micro cell, where the solutions are mired to start reaction, and tbe absorbance is measured against reaction time. This flow system wa