Low cycle isothermal mechanical fatigue testing of a eutectic alloy 63Sn/37Pb was carried out in a systematic manner over a wide range of frequencies (10 Ϫ4 -1 Hz) and temperatures (Ϫ40 to 150°C) with the total strain set at different values (1-50%). The low cycle fatigue behavior of the eutectic so
Effect of temperature on isothermal low cycle fatigue properties of Sn–Ag eutectic solder
✍ Scribed by C Kanchanomai; Y Mutoh
- Publisher
- Elsevier Science
- Year
- 2004
- Tongue
- English
- Weight
- 670 KB
- Volume
- 381
- Category
- Article
- ISSN
- 0921-5093
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
Multiaxial fatigue tests were conducted on Sn-3.5Ag solder specimens under axial/torsional loading at room temperature. It was found that the ratcheting strain increased while the fatigue life decreased with the increase of axial stress and shear strain amplitude. A power relationship of ratcheting
## Abstract Corrosion properties of three different Sn‐Ag lead free solder alloys have been investigated in 0.3 wt% Na~2~SO~4~ solution as corrosive environment. As cast solder alloy was analyzed by X‐ray diffraction (XRD) and scanning electron microscopy (SEM). Volume fractions of the Ag~3~Sn in t