𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of frequency on the cyclic creep and fracture of a lead-rich lead-tin solder alloy

✍ Scribed by R.C. Weinbel; E.A. Schwarzkopf; J.K. Tien

Book ID
116062729
Publisher
Elsevier Science
Year
1987
Weight
254 KB
Volume
21
Category
Article
ISSN
0036-9748

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Effect of cooling rate on the room-tempe
Effect of cooling rate on the room-temperature indentation creep of cast lead-free Sn-Bi solder alloys
✍ Mahmudi, R. ;Geranmayeh, A. R. ;Mahmoodi, S. R. ;Khalatbari, A. πŸ“‚ Article πŸ“… 2007 πŸ› John Wiley and Sons 🌐 English βš– 418 KB

## Abstract The influence of cooling rate on the creep behavior of cast Sn–(1–5)%Bi solder alloys was studied by indentation testing at room temperature. The alloys were prepared at two different cooling rates of 0.01 Ks^–1^ and 8 Ks^–1^. This affected the microstructure and thus, the creep behavio

Effect of indium content and rapid solid
Effect of indium content and rapid solidification on microhardness and micro-creep of Sn-Zn eutectic lead free solder alloy
✍ R. M. Shalaby πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 145 KB πŸ‘ 1 views

## Abstract The Sn‐Zn alloys have been considered as lead‐free solders. In this paper, the effect of 0.0, 0.5, 1.0, 1.5 and 2.0 wt.% Indium as ternary additions on melting temperature, structure, microhardness and micro‐creep of the Sn‐9Zn lead‐free solders were investigated. It is shown that the a