The dynamic behaviour of structures, in particular, that of a rotor, containing cracks is a subject of considerable current interest. Several researchers have developed models of cracked rotor systems considering mainly a single transverse surface crack. In the present study Finite Element (FEM) ana
DYNAMICS OF A TWO-CRACK ROTOR
โ Scribed by A.K. DARPE; K. GUPTA; A. CHAWLA
- Publisher
- Elsevier Science
- Year
- 2003
- Tongue
- English
- Weight
- 588 KB
- Volume
- 259
- Category
- Article
- ISSN
- 0022-460X
No coin nor oath required. For personal study only.
โฆ Synopsis
The effect of the presence of the single transverse crack on the response of the rotor has been a focus of attention for many researchers. In the present work a simple Jeffcott rotor with two transverse surface cracks has been studied. The stiffness of such a rotor is derived based on the concepts of fracture mechanics. Subsequently, the effect of the interaction of the two cracks on the breathing behavior and on the unbalance response of the rotor is studied. When the angular orientation of one crack relative to the other is varied, significant changes in the dynamic response of the rotor are noticed. A special case of practical importance of a two-crack rotor is one when one of the cracks is assumed to remain open always whereas the other can breathe like a fatigue crack. This simulates a transverse crack in an asymmetric rotor. Effect of orientation of the breathing crack with respect to the open crack on the dynamic response is studied in detail. The results of the present study will be useful in diagnosing fatigue cracks in real rotors, which invariably have some asymmetry.
๐ SIMILAR VOLUMES
The dynamic behaviour of structures-in particular, rotors containing cracks-is a subject of considerable current interest. Several researchers have developed models of cracked rotor systems considering mainly the transverse surface crack. In the present study finite element (FEM) analysis of a rotor
The subcritical growth of semi-elliptical surface cracks in the front face of a cylindrical disk was calculated. The disk represents a part of a turbine rotor. The stress intensity factors, which are the basis for the calculations presented here, were given in a former paper [l]. The load steps cons
A new method is proposed to detect and locate a crack in a rotor system. A vector quantity ''residue'' is defined using the measured vibration response of the rotor system and the modeled system matrices. It is shown that the non-zero elements of ''residue'' correspond to the nodes encompassing the