𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Dual-band-rejection filter based on split ring resonator (SRR) and complimentary SRR

✍ Scribed by Xin Hu; Qiaoli Zhang; Sailing He


Book ID
102517406
Publisher
John Wiley and Sons
Year
2009
Tongue
English
Weight
218 KB
Volume
51
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

A novel concept of a compact, low insertion‐loss dual‐band‐rejection filter (DBRF) is proposed, and its equivalent circuit model is given. The filter consists of single split ring resonators (SRRs) on the top of the host microstrip line and Complimentary SRR etched on the back ground plane. The dimensions of the structure are as small as 1.4 cm × 2 cm, while high frequency selectivity is achieved at both band edges due to the presence of two transmission zeros. The filter has an insertion loss of better than 1 dB, a return loss of larger than 10 dB in the passband from 3.3 to 4.0 GHz, and two rejections of greater than 30 dB within 2.5–2.6 and 5.2–5.6 GHz. © 2009 Wiley Periodicals, Inc. Microwave Opt Technol Lett 51: 2519–2522, 2009; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.24596


📜 SIMILAR VOLUMES


A comparative investigation of SRR- and
✍ V. Öznazı; V. B. Ertürk 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 267 KB

## Abstract A comparative investigation of split‐ring resonator (SRR)‐ and complementary split‐ring resonator (CSRR)‐based band‐reject filters is performed. These compact band‐reject filters are obtained by loading simple 50‐Ω microstrip lines with SRRs and CSRRs that have exactly the same shape an

Miniaturized dual-passband microstrip fi
✍ Alper Genc; Reyhan Baktur 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 345 KB

## Abstract We present a miniaturized dual‐passband filter module designed using double‐split complementary split ring resonator (DS‐CSRR) and split ring resonator (SRR). The use of SRR results in a significant size reduction of the filter comparing with edge‐coupled‐line filters. Two passbands are

Compact ultra-wideband filter with dual
✍ Qing-Xin Chu; Jian-Quan Huang 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 826 KB

## Abstract A compact ultra‐wideband (UWB) bandpass filter (BPF) with double notched bands is presented in this article.The proposed BPF comprises one T‐shaped multiple modes resonator and two microstrip‐CPW transition structures etched with different complementary split ring resonators (CSRRs). A

Dual-band bandpass filter based on a hol
✍ D. Girbau; A. Lázaro; A. Pérez; L. Pradell 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 183 KB

## Abstract This article proposes a new dual‐band microstrip resonator, addressed as hole resonator, to be integrated in dual‐band bandpass filters. The main advantage of this structure is that it can be easily coupled in parallel to other resonators since its profile is constant, in contrast with

Wideband microstrip bandpass filter base
✍ Jack Wu; S. N. Qiu; C. X. Qiu; I. Shih 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 317 KB

## Abstract A new design of wideband microwave bandpass filter based on intercoupled split‐ring resonator is proposed. The split‐ring resonator structure is well‐know for its unique resonance feature that exhibit a negative permeability. By implementing the split‐ring resonator directly on a micros

Design of dual-band filter using defecte
✍ B. Wu; J. W. Fan; L. P. Zhao; C. H. Liang 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 279 KB

## Abstract A novel type of dual‐band microstrip structure and its equivalent circuit are investigated, which is composed of defected split‐ring resonator and interdigital capacitor. The influence of design parameters on the frequency characteristics is discussed, then a dual‐band microstrip filter