Determination of dissolved oxygen by use of a spectrophotometric flow-through sensor
✍ Scribed by Antonio Sanz-Martínez; Angel Ríos; Miguel Valcárcel
- Publisher
- Elsevier Science
- Year
- 1993
- Tongue
- English
- Weight
- 406 KB
- Volume
- 284
- Category
- Article
- ISSN
- 0003-2670
No coin nor oath required. For personal study only.
✦ Synopsis
A simple flow-injection method for the automatic photometric determination of low concentrations of dissolved oxygen in waters was developed. The method uses Methylene Blue immobilized on a cationic exchange resin packed into a flow-cell located in the spectrophotometer, where the leuco form of the dye is formed by flowing a dithionite solution. The flow-through sensor thus prepared provides a response, the reliability of which depends on the oxygen content in the sample concerned. The linear calibration range accomplished was 0.9 to 5.5 mg I-' oxygen, with a relative standard deviation of 2.2-0.6% over this range; the sampling frequency was 18-22 hh'.
📜 SIMILAR VOLUMES
## Abstract When a dissolved oxygen (DO) probe is submerged in an air‐saturated cell culture medium the thickness of the liquid film that exists outside the membrane of a DO probe changes with hydrodynamic shear. The response of the DO probe thus varies with the hydrodynamic shear environment near
A flow-injection analysis (FIA) setup with flow-through tubular solid-state AgI-based membrane detector, sensitive to the sulfhydryl group, is examined. Application of a flow-injection system is exemplified by the determination of different compounds containing sulfur in 0.1 M HClO 4 as a supporting
A spectrophotometric, continuous flow-injection, merging zones manifold including an enzyme reactor was used for the determination of magnesium ion in serum by exploiting the activating effect of MgfII) on the hydrolysis of o-nitrophenyl-B-o-galactopyranoside by j?-o-galactosidase immobiliied on con