𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Design of UWB switched gain controlled LNA using 0.18 μm CMOS

✍ Scribed by Jeong, M.l.; Lee, J.N.; Lee, C.S.

Book ID
118002948
Publisher
The Institution of Electrical Engineers
Year
2008
Tongue
English
Weight
283 KB
Volume
44
Category
Article
ISSN
0013-5194

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A high-performance 1–7 GHz UWB LNA using
A high-performance 1–7 GHz UWB LNA using standard 0.18 μM CMOS technology
✍ Shu-Hui Yen; Chang-Zhi Chen; Yo-Sheng Lin; Chi-Chen Chen 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 493 KB

design of multiband antennas using a single radiator. The theoretical prediction of antenna resonances can be achieved based on an effective medium model. Theoretical results have been verified via numerical simulations and measurements, which are all in good agreement. Further works include the imp

A 0.18-μm 3.1–4.8 GHz CMOS wideband LNA
A 0.18-μm 3.1–4.8 GHz CMOS wideband LNA for UWB system
✍ Moo I. Jeong; Jung N. Lee; Chang S. Lee 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 328 KB

## Abstract We have proposed a 3.1–4.8 GHz CMOS wideband low noise amplifier (LNA) for ultra wideband system. The LNA is fabricated with the 0.18‐μm 1P6M standard CMOS process. Measurement of the CMOS LNA was performed using RF probe station. From 3.1 to 4.8 GHz, the wideband LNA exhibits a noise f

A 5.8-GHz LNA with image rejection and g
A 5.8-GHz LNA with image rejection and gain control based on 0.18-μm CMOS
✍ Jin-pil Kim; Yong-Hun Oh; Jin-Young Choi; Sang-gug Lee 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 130 KB

## Abstract This paper presents a low‐noise amplifier (LNA) design which includes image rejection and gain control. The proposed LNA adopts a cascode topology with a notch filter combined with a gain control function. The performance of the proposed LNA is compared with conventional cascode topolog

Design of LNA at 2.4 GHz using 0.25 μm C
Design of LNA at 2.4 GHz using 0.25 μm CMOS technology
✍ Xiaomin Yang; Thomas X. Wu; John McMacken 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 192 KB

## Abstract Two 2.4‐GHz fully integrated CMOS low‐noise amplifiers (LNA) have been designed in a 0.25‐μm CMOS process. Design procedure and simulation results are presented in this paper. In the design of differential LNA, a novel idea is proposed so that the die area can be greatly reduced. © 2003