## Abstract We proposed a compact microstrip band‐pass filter with wide stopband in this article.Microstrip gap and interdigital capacitor combine with stub inductors shorted to the ground plane by via were used to take advantage of different aspects of left‐handed behavior to achieve compact size
Design of compact microstrip band-pass filter with ultra-wide stopband
✍ Scribed by Ko-Wen Hsu; Wen-Hua Tu
- Publisher
- John Wiley and Sons
- Year
- 2010
- Tongue
- English
- Weight
- 475 KB
- Volume
- 52
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
We present the development of a miniaturized broadband Wilkinson power divider on a multilayer organic substrate with integrated thin film resistors. The VSWR for all port for both dividers is better than 1.6:1, the excess insertion loss is less than 1.6 dB up to 18 GHz, and 12 dB of isolation is realized. A size reduction of 43% is achieved. The proposed divider has the widest bandwidth ratio, 9:1, and the most compact size, 9.3 mm by 6 mm. V
📜 SIMILAR VOLUMES
## Abstract This paper presents a compact microstrip low‐pass filter with ultra‐wide stopband and sharp cutoff frequency response. The conventional shunt open‐stub filter with a slot on the ground plane has a wide stopband at high frequency, and the coupled open‐stub microstrip filter has a sharp c
## Abstract An ultra‐wide stopband microstrip lowpass filter(LPF) for harmonics suppression is introduced in this letter. The LPF is composed of three open stubs, a pair of spur‐lines, and a pair of parallel coupled‐lines with symmetrical structure. Measured results verify that the filter has a ret
## Abstract An improved spiral compact microstrip resonance cell (SCMRC) structure is proposed in this article. Good low pass performance and wide stopband characteristics can be achieved with a simple single cell, two transmission zeros are introduced within the stopband and thus improve the bandw
## Abstract The transmission characteristic of the microstrip with complementary split ring resonator (CSRR) is researched. Compared with the conventional structure, this filter can achieve a wider bandgap by shifting the gap of CSRR from the side of the microstrip to the underside. And then, a low
## Abstract In this article, the band‐pass filter (BPF) of stepped‐impedance hairpin (SIH) design having a very wide stopband performance was proposed.The filter composed of two SIHs connected by a narrow bended microstrip with the latter's middle point shorting to the ground through a via hole. A