𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Design and fabrication of a new micromachined interdigital coplanar waveguide

✍ Scribed by Xiao-Feng Sun; Gui-Fu Ding; Dong-Hua Gu; Bin-Hong Li; Min-Yi Shen

Book ID
104051218
Publisher
Elsevier Science
Year
2006
Tongue
English
Weight
341 KB
Volume
37
Category
Article
ISSN
0026-2692

No coin nor oath required. For personal study only.

✦ Synopsis

In this paper, a new micromachined interdigital coplanar waveguide (CPW) structure has been developed and its characteristics have been studied as a function of transmission line parameters. In interdigital CPW, the ground conductor is thickened by micromachining techniques which is helpful for reducing the interference between the adjacent center conductors while microwave transmits along it. Within the frequency range from 5 to 20 GHz, the return loss of this structure has two minimal values whose positions change with the structural parameters. The relative bandwidths reached 23.5% and 9.97% at 8.3 and 16.55 GHz while the insertion losses are about 0.33 and 0.5 dB/cm, respectively. The interdigital CPW is useful for designing bandpass filter and phase shifter and minimizing the whole size of microelectromechanical system (MEMS) devices.

πŸ“œ SIMILAR VOLUMES

New micromachined interdigital coplanar
New micromachined interdigital coplanar waveguide
✍ Xiaofeng Sun; Guifu Ding; Donghua Gu; Binhong Li; Minyi Shen πŸ“‚ Article πŸ“… 2007 πŸ› John Wiley and Sons 🌐 English βš– 272 KB

## Abstract A novel interdigital coplanar waveguide (CPW) has been designed and fabricated and its characteristics have been studied as a function of transmission line parameters. In this interdigital CPW, the ground conductors are thickened by micromachining techniques, which are helpful for reduc

A new coplanar waveguide bandpass filter
A new coplanar waveguide bandpass filter using interdigital DGS
✍ Jae-Kwan Lee; Young-Sik Kim πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 220 KB

## Abstract In this letter, a new bandpass filter (BPF) with coplanar waveguide using interdigital capacitor and interdigital defected ground structure is proposed. The proposed BPF size is reduced about 33% compared to the BPF using a conventional DGS one. Both filters have lower and higher cutoff

Design optimization of micromachined fer
Design optimization of micromachined ferroelectric-based phase shifter using modified ground coplanar waveguide
✍ Indrajit Paul; K. J. Vinoy πŸ“‚ Article πŸ“… 2005 πŸ› John Wiley and Sons 🌐 English βš– 215 KB

In this paper, a new approach to optimally design a phase shifter consisting of a periodic array of ferroelectric-based tunable planar interdigital capacitors (IDCs) is presented. Spiral slots in the proposed configuration reduces the overall size and improves the performance by 30%.

Design of a triple-band coplanar-wavegui
Design of a triple-band coplanar-waveguide bandpass filter
✍ Chang-Sin Ye; Yan-Kuin Su; Min-Hang Weng; Chun-Yueh Huang πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 English βš– 227 KB

## Abstract A novel compact and high‐isolation triple‐band coplanar‐waveguide bandpass filter designed at 1.30, 2.03, and 2.74 GHz is presented. More than one transmission zero between the three passbands is realized to improve the selectivity of the filter and to achieve a high isolation higher th