The design of CPW bandpass filters with electromagnetic simulations dri¨en indirectly by an equal ripple based optimizer is presented. This ¨ector procedure has se¨eral ad¨antages o¨er the general-purpose optimization routines pre¨iously applied to the design of CPW filters. The filter, which employ
Design of a triple-band coplanar-waveguide bandpass filter
✍ Scribed by Chang-Sin Ye; Yan-Kuin Su; Min-Hang Weng; Chun-Yueh Huang
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 227 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A novel compact and high‐isolation triple‐band coplanar‐waveguide bandpass filter designed at 1.30, 2.03, and 2.74 GHz is presented. More than one transmission zero between the three passbands is realized to improve the selectivity of the filter and to achieve a high isolation higher than 30 dB. Good agreements between the simulated and measured results demonstrate our proposed structure. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 1545–1547, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23417
📜 SIMILAR VOLUMES
## Abstract In this letter, a new bandpass filter (BPF) with coplanar waveguide using interdigital capacitor and interdigital defected ground structure is proposed. The proposed BPF size is reduced about 33% compared to the BPF using a conventional DGS one. Both filters have lower and higher cutoff
## Abstract With the rapid development of wireless communications, sharp rejection, and wide stopband are very important issues for filter applications. In this paper, a novel compact coplanar‐waveguide bandpass filter (CPW–BPF) is designed and implemented on commercial substrate. This filter at ce
## Abstract In this paper, it is demonstrated that split‐ring resonators (SRRs) magnetically coupled to a coplanar waveguide (CPW) structure can be applied to the design of miniaturized band‐pass filters. To this end, a two‐stage prototype device consisting of a CPW with two signal‐to‐ground shorts
## Abstract A novel triple‐band microstrip bandpass filter is proposed in this article. The first and the third passbands of the filter are realized by the parallel coupled microstrip line, and the second passband is realized by using an end‐coupled microstrip line. Then the resonators are coupled