𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Design and experimental investigation on novel microstrip band-pass filters

✍ Scribed by V. Passi; H. Ghafouri-Shiraz

Publisher
John Wiley and Sons
Year
2008
Tongue
English
Weight
210 KB
Volume
50
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

Two novel fifth order, 2.5‐GHz bandpass filters, with 4% bandwidths were designed and fabricated. The filters which are modified versions of the hairpin filter are designed empirically using the optimization feature in microwave simulation software. We found good agreement between the simulated and measured responses of these filters, validating the optimization design methodology. The original hairpin filter has also been fabricated, and it is shown that the novel filters have good performance in comparison. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 655–658, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23152

📜 SIMILAR VOLUMES

A novel microstrip band-pass filter base
A novel microstrip band-pass filter based on hole coupling structure
✍ Yan Yuan; Jun Xu; Yan-Qing Xu; Xiao-Chuan Zhang 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 467 KB

## Abstract A novel C‐band hole‐coupled bandpass filter with metallized post (or via‐hole) arrays directly embedded in middle of the microstrip line is presented in this letter.The proposed filter removes via‐hole arrays embedded along waveguide section from the half‐mode substrate integrated waveg

A novel photonic band-gap microstrip str
A novel photonic band-gap microstrip structures for low-pass filters of wide stop-band
✍ Haiwen Liu; Zhengfan Li; Xiaowei Sun; Junfa Mao 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 93 KB

## Abstract Two novel low‐pass filters (LPFs) of wide stop‐band are proposed in this paper. One filter is implemented by a photonic band‐gap (PBG) microstrip structure with T‐junction opened stubs and its frequency characteristics are discussed. The other filter is implemented by a PBG microstrip s

Design of compact stop-band extended mic
Design of compact stop-band extended microstrip low-pass filters by employing mutual-coupled square-shaped defected ground structures
✍ A. Boutejdar; M. Makkey; A. Elsherbini; A. Omar 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 925 KB

## Abstract A new technique to reduce the size, improve the rejection in the stop‐band of a low‐pass filter using modified defected ground structure (DGS) is proposed. An equivalent circuit model is used to study the DGS characteristics. The parameters are extracted by using a simple circuit analys

Design and analysis of on-package dual-m
Design and analysis of on-package dual-mode band pass filters for highly integrated wireless transceivers
✍ Ming-Sze Tong; Yinchao Chen; Qunsheng Cao; Mingwu Yang; Ronan Sauleau 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 198 KB

## Abstract In this paper, various planar printed microwave bandpass filters (BPFs) are designed and analyzed by applying a nonuniform finite‐difference time‐domain (NU‐FDTD) method. These filters, referred to as integrated‐circuit package filters (ICPFs), are designed in such a way that they opera

On the relationship among dual-mode doub
On the relationship among dual-mode double-ring and double slot-ring resonators for wide band-pass filter design
✍ Shuh-Tai Lu; Ping-Chun Deng; Ji-Chyun Liu; Tai-I Wu 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 691 KB

## Abstract The novel configurations of dual‐mode double slot‐ring resonator (DMDSRR) are introduced to improve the performance of the dual‐mode double‐ring resonator (DMDRR). To obtain a lower insertion loss (−0.76 dB) higher rejection (−48.21 dB) and wider band (BW about 93.35%) filters using tre