A novel microstrip band-pass filter based on hole coupling structure
✍ Scribed by Yan Yuan; Jun Xu; Yan-Qing Xu; Xiao-Chuan Zhang
- Publisher
- John Wiley and Sons
- Year
- 2011
- Tongue
- English
- Weight
- 467 KB
- Volume
- 53
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A novel C‐band hole‐coupled bandpass filter with metallized post (or via‐hole) arrays directly embedded in middle of the microstrip line is presented in this letter.The proposed filter removes via‐hole arrays embedded along waveguide section from the half‐mode substrate integrated waveguide filter, while the new concept simplifies the structure of previous filter. Simulated and experimental results show that the proposed filter of this paper has good performances of low insertion loss, return loss, and better rejection characteristics. The insertion loss of measured four‐pole filter is about 0.8 dB, and the return loss is better than −25 dB in the whole passband. Keeping the advantages of excellent performances, the proposed filter can be constructed more conveniently and is suitable for low‐cost planar circuit. © 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett 53:2811–2814, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26373
📜 SIMILAR VOLUMES
## Abstract Two novel fifth order, 2.5‐GHz bandpass filters, with 4% bandwidths were designed and fabricated. The filters which are modified versions of the hairpin filter are designed empirically using the optimization feature in microwave simulation software. We found good agreement between the s
## Abstract Two novel low‐pass filters (LPFs) of wide stop‐band are proposed in this paper. One filter is implemented by a photonic band‐gap (PBG) microstrip structure with T‐junction opened stubs and its frequency characteristics are discussed. The other filter is implemented by a PBG microstrip s
## Abstract A novel microstrip bandpass filter integrating the defected ground structure and slotline coupling technique is presented in this letter. A slotline resonator with a length of three‐quarter wavelength at central frequency is etched on the ground, while a pair of radial stubs is centrall
## Abstract Microstrip line is characterized by many advantages such as easy fabrication, compact size, lightweight, planar structure, and easy integration with other components on a single circuit board. In this article, a novel microstrip millimeter wave band‐pass filter with slow‐wave resonator
## Abstract This article proposes a new dual‐band microstrip resonator, addressed as hole resonator, to be integrated in dual‐band bandpass filters. The main advantage of this structure is that it can be easily coupled in parallel to other resonators since its profile is constant, in contrast with