𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Depth profiling a III–V multilayered structure with an excimer laser

✍ Scribed by O. L. Bourne; D'Arcy Hart; D. M. Rayner; P. A. Hackett

Book ID
104733606
Publisher
Springer
Year
1994
Tongue
English
Weight
348 KB
Volume
59
Category
Article
ISSN
1432-0630

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Depth profile analysis of an electrodepo
Depth profile analysis of an electrodeposited multilayer structure with non-uniform thickness distribution by glow discharge optical spectroscopy
✍ Zdeněk Weiss 📂 Article 📅 1991 🏛 John Wiley and Sons 🌐 English ⚖ 366 KB

## Abstract An electrodeposited multiplayer structure consisting of nine alternating layers of copper and nickel was depth profiled by glow discharge emission spectroscopy using a Grimm lamp with an anode tube of internal diameter 4 mm. Depth profiled of the non‐uniform region near the sample edge

Depth profiling of an In0.53Ga0.47As/InP
Depth profiling of an In0.53Ga0.47As/InP multilayer sample using grazing-incidence sputtered neutral mass spectrometry with laser post-ionization
✍ Higashi, Yasuhiro; Maruo, Tetsuya; Homma, Yoshikazu 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 199 KB

Depth proÐling of thin layers in InP using sputtered neutral mass spectrometry with grazing-In 0.53 Ga 0.47 As incidence ion beam sputtering and laser post-ionization was performed and compared with SIMS and AES depth proÐling. The depth resolution was improved by using grazing incidence (at an inci

Effect of force on ablation depth for a
Effect of force on ablation depth for a XeCl excimer laser beam delivered by an optical fiber in contact with arterial tissue under saline
✍ Geert H. M. Gijsbers; Duco G. van den Broecke; René L. H. Sprangers; Martin J. C 📂 Article 📅 1992 🏛 John Wiley and Sons 🌐 English ⚖ 799 KB

## Abstract The effect of force applied to a 430 üm single fiber, delivering 60 pulses of 308 nm XeC1 laser radiation at 20 Hz, on the ablation depth in porcine aortic tissue under saline has been investigated. Energy densities of 8,15,25, 28, 31, 37, and 45 mJ/mm^2^ were used. Force was applied by