✦ LIBER ✦

Dependence of curing time, peak temperature, and mechanical properties on the composition of bone cement

✍ Scribed by Brauer, G. M. ;Steinberger, D. R. ;Stansbury, J. W.

Publisher: John Wiley and Sons
Year: 1986
Tongue: English
Weight: 834 KB
Volume: 20
Category: Article
ISSN: 0021-9304
DOI: 10.1002/jbm.820200614

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Time dependent mechanical properties of

Time dependent mechanical properties of bone cement. An in vitro study over one year

✍ Markus Nottrott; Anders Odd Mølster; Nils Roar Gjerdet 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 320 KB

## Abstract Changes in mechanical properties of bone cements over time are of clinical importance, but not well documented. Specifications for testing do not address the time factor. This study recorded changes in compressive properties and microstructure of one bone cement stored under simulated p

Time and temperature dependence of the m

Time and temperature dependence of the mechanical properties of polystyrene bead foam

✍ J. A. Rinde; K. G. Hoge 📂 Article 📅 1971 🏛 John Wiley and Sons 🌐 English ⚖ 890 KB

## Abstract Tensile and compressive properties of polystyrene bead (PSB) foams at room temperature for strain rates from 10^−3^ to 10^5^ min^−1^ can be represented as nearly linearly increasing functions of modulus or stress versus the logarithm of the strain rate. The shear modulus and tensile dat

Experimental and computational models to

Experimental and computational models to investigate the effect of adhesion on the mechanical properties of bone-cement composites

✍ B. Helgason; P. Stirnimann; R. Widmer; S. J. Ferguson 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 820 KB

## Abstract A generic finite element approach was developed to study the effect of adhesion on the mechanical response of bone cement composites and validated against literature data. The results showed that a zero friction bone‐cement (PMMA) interface conditions captured the results of the experim

Role of amine activators on the curing p

Role of amine activators on the curing parameters, properties and toxicity of acrylic bone cements

✍ Vazquez, Blanca; Levenfeld, Belen; San Roman, Julio 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 296 KB 👁 3 views

A review about the accelerating e †ect of tertiary aromatic amines used as activator in the benzoyl peroxide/amine system for the curing of acrylic resins is presented. The kinetics, mechanism and activation energy of the reaction are considered, together with some toxicity, residuals and leaching d

Effects of the initial temperature of ac

Effects of the initial temperature of acrylic bone cement liquid monomer on the properties of the stem-cement interface and cement polymerization

✍ Iesaka, K. ;Jaffe, W. L. ;Kummer, F. J. 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 123 KB 👁 1 views

It has been shown that preheating the femoral stem prior to insertion minimizes interfacial porosity at the stem-cement interface. In this study, the effects of methylmethacrylate monomer temperature prior to mixing on the properties of stem-cement interface and cement polymerization were evaluated

The influence of temperature and specime

The influence of temperature and specimen size on the flexural properties of pmma bone cement

✍ Brown, S. A. ;Bargar, W. L. 📂 Article 📅 1984 🏛 John Wiley and Sons 🌐 English ⚖ 872 KB

A three-stage investigation was undertaken to examine the influence of specimen size and polymerization environment on the flexural properties of PMMA. In the first stage, specimens were cut from large pieces of commercially cast acrylic (lucite) and self-curing dental acrylic. The material properti