Comprehensive Take on Technological Development in the Digital Economy and Industry 4.0 (Introduction)
Contents
Features of VMI Technology for Joint Stock Management of Products with a Limited Shelf Life in Cluster Logistics
1 Introduction
2 Methodology
3 Results
4 Conclusion
References
Modeling and Optimization of Forming Processes of Aircraft Engineering Thin-Wall Structures
1 Introduction
2 Methodology
3 Results
4 Conclusion
References
Improving the Organization of Working Space in Industrial Enterprises During the Era of Intelligent Machines
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Vibro-Abrasive Engineering of the High-Resource Titanium Aircraft Parts Surface
1 Introduction
2 Methodology
3 Results
4 Conclusions
References
Numerical Calculation of the Heat Sink Parameters of the Shell Turbine Vanes at the Modeling of the Heat-Protective Coating with a Different Number of Layers
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
The Mathematical Model of the Stamp Material Redistribution Using Uniform Bar Structures
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Removing Weld Defect Causes in Aviation Stainless Steel Piping Elements
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Impact and Effect Study of Submerged-Arc Welding Conditions on Structural Changes in Weld Metal
1 Introduction
2 Materials and Method
3 Results
4 Conclusions
References
Experimental Validation of Identification Crack Propagation in Plates as a Source of Acoustic Emission
1 Introduction
2 Materials and Method
3 Results and Discussion
4 Conclusion
References
Investigation of the Influence of Electrical Modes on the Morphology and Properties of Oxide Coatings on Aluminum Alloy 1163, Obtained by the Microarc Oxidation
1 Introduction
2 Materials and Method
3 Results and Discussion
4 Conclusions
References
Development of an Intelligent Control System for an Autonomous Hybrid Solar System
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Intelligent Control System for the Complex of Ultrasonic Gas-Oxigen Burners
1 Introduction
2 Analysis of the Existing Control System
3 Conclusions
References
Algorithm of Fuzzy Controller Membership Function Allocation at Fuzzification Stage
1 Introduction
2 Mathematical description of Tuning Algorithm for Fuzzification Block
3 Conclusions
References
High-Speed Energy-Efficient Power Sources for Electromechanical Systems
1 Introduction
2 Methodology
3 Results
4 Conclusions
References
Modeling the Combustion Process of Solid Fuel Boilers
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Tensile Model of a Shell-Type Flat Plate at Different Displacement Velocity Fields
1 Introduction
2 Materials and Methods
3 Results
4 Conclusion
References
Bearing Capacity of Built-Up Structures of Multi-storey Buildings, Taking into Account Ultimate Concrete Strains and Shear Braces
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Vibrations of a Rod Carrying a Small Attached Mass
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
The Typical Settings for Automatic Control Systems
1 Introduction
2 Methods
3 Results
3.1 Typical Setting -3-1-3
3.2 Modified Typical Setting -3-1-3
3.3 Symmetrical Setting with a Given Oscillation Index
4 Conclusion/Recommendations
References
Process Automation for Robot-Based Manufacturing Components of Prospective Aviation Complexes
1 Introduction
2 Methodology
3 Results
4 Conclusion
References
Experimental Verification of the Mathematical Model for Thin-Walled Cylindrical Shell Vibrations on Exposure to Uniform Temperature, Based on Variational Formulation
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Optimization of Technological Parameters of Robotized Mechanical Processing Processes of Aviation Products
1 Introduction
2 Materials and Methods
3 Results
4 Conclusion
References
Research and Calculation of the Interference Structure Parameters in the Cross Section of a Diffraction-Bounded Laser Beam
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Intelligent Deep Neuro-Fuzzy System of Abnormal Situation Recognition for Transport Systems
1 Introduction
2 Methodology
3 Results
4 Conclusion
References
Multipoint High-Temperature Forming of High-Strength Aluminum Alloy Plates in the Process of Manufacturing Large-Sized Ribbed Double-Curvature Panels
1 Introduction
2 Methodology
3 Results
4 Conclusion
References
Impact of Single Laser Pulse on Surface of Steel Used in Fabricated Structures
1 Introduction
2 Materials and method
3 Results
4 Conclusion
References
Technological Principles of Regulating the Kinetics of Carbon Fiber Reinforced Plastic Curing Process Under Conditions of Difficult Temperature Programs
1 Introduction
2 Materials and Methods
3 Results
4 Conclusion
References
Structure and Properties of Copper(II) and Cobalt(II) Halide Complexes with N–Heterocycles of Composition (HL)n[MHal4]
1 Introduction
2 Materials and Methods
3 Results
4 Conclusion
References
Influence of Technological Parameters of Centrifugal Casting of Aviation Aluminum Alloy on the Physical and Mechanical Properties of Castings
1 Introduction
2 Method of Research
3 Results and Discussion
4 Conclusion
References
Fabrication Specifics and Study Results for Metal Items Produced by Surfacing
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
High Productivity Turning of Stainless Steel 06Cr14H6Cu2MoNbTi
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Gantry Technology in Agriculture Greening
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Demercaptanization of Straight-Run Kerosene Fraction According to “Demerus Jet” Technology
1 Introduction
2 Methodology
3 Results and Discussions
4 Conclusion
References
Thermally Induced Spin Crossover in Iron (II, III) Complexes with Tripodal Ligands
1 Introduction
2 Methodology
3 Results and Discussion
4 Conclusion
References
Digitalization of the Economy and the Problems of Industrial Production
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Russian Economy and Digitalization Trends of Our Time
1 Introduction
2 Conclusion
References
Approaches to Assessing the State of Transport Services in the Region
1 Introduction
2 Materials and Methods
3 Results and Discussion
4 Conclusion
References
Directions of Digital Financial Technologies Development: Challenges and Threats to Global Financial Security
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Digital Economy Development Problems in Russia Under the Conditions of Venture Projects Elevated Uncertainty
1 Introduction
2 Materials and Methodology
3 Results
4 Conclusion
References
Forming the Human Resources Potential for Innovative and Technological Development of the Region Within the Framework of the “Triple Helix” Model
1 Introduction
2 Methodology
3 Results
4 Conclusion and Recommendations
References
Strategies for the Development of Complex Organizational and Economic Systems in the Conditions of Digitalization
1 Introduction
2 Methodology
3 Results
4 Conclusion
References
Strategies of Digital Transformations of Higher Educational Institutions: Experience, Methodological Aspects of Choice and Implementation
1 Introduction
2 Methodology
3 Results
4 Conclusion
References
Improving the Efficiency of Financial and Economic Activities of an Enterprise on the Basis of a Comprehensive Analysis of the Economic Situation in the Context of Transition to the Digitalization of Agricultural Production
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
The Impact of Artificial Intelligence on the Socio-economic Development of Society in Modern Conditions
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Applications of Computer Vision in Cross-Sectoral Tasks
1 Introduction
2 Methodology
3 Results
4 Conclusion
References
Algorithmic Bases of Research of Combined Energy Converters by Engineering Analysis Methods
1 Introduction
2 Materials and Method
3 Results
4 Conclusions
References
Modeling of Mass Transfer Processes in Special Applications Energy Devices
1 Introduction
2 Materials and Method
3 Results
4 Conclusions
References
Study of Numerical Vibrations of Open Thin-Walled Cylindrical Shells
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Dissipative Structures of Laser-Hardened Structural Steels
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Study of Nonequilibrium Structures by the Method of Multifractal Parametrization
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Investigation of the Processes of Transition of an Alloying Element into an Alloy During Electroslag Remelting of a Slag System Based on Multicomponent Raw Materials
1 Introduction
2 Materials and Method
3 Results and Discussion
4 Conclusion
References
High-Temperature Hydrogen Transfer Piping Element Repair in Oil Refinery: Case Study
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Change in Weld Metal Structure and Properties for Multi-pass Butt Welding of Stainless Steel Process Piping
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Combined Control in the System with Modal PI-Regulator
1 Introduction
2 Methodology
3 Results
4 Conclusion
References
Research Methodology Based on the Idea of the Limiting Transition of Damping Properties of Structures Vibrating in the “Air” Medium Using a Laser Vibrometer
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Modeling of Hydraulic Structure Reliability Parameters During a Flood
1 Introduction
2 Methodology
3 Results
4 Conclusions
References
Turning and Milling Conceptual Issues
1 Introduction
2 Materials and Methods
3 Obtained Results and Discussion
4 Conclusion
References
Production Process Impact on Permanent Electron-Beam Weld Connection Characteristics for Assembly of Large Titanium Aircraft Primary Structural Components
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Production Process Specifics for Permanent Fusion Weld Connections When Assembling Aircraft Titanium Ribbed Panels
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Power Transformer Electronic Starter
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Operation Features Researching of Three-Phase Transformers Switched on to an Asymmetric Load
1 Introduction
2 Methodology
3 Results
4 Conclusion
References
Thermal Simulation in Transformer Type Heating Devices
1 Introduction
2 Methodology
3 Results
4 Conclusion
References
Design of High-Speed Rotor Systems with Gas-Magnetic Bearings
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Influence of the Shape and Support Type of Thin-Walled Cylindrical Shell on Its Forced Vibrations
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Application of a Reactor-Thyristor Device at a Transformer Substation
1 Introduction
2 Methodology
3 Results
4 Conclusion
References
The Experience of the Portal Machine Control System Modernizing for Automatic Arc Welding and Surfacing in a Shielded Gas
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Models for Calculating Pipeline Performance with Data Hazards
1 Introduction
2 Methodology
3 Results
4 Conclusion
References
Imperatives of the Digital Economy and Methodology Transformational Management
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Innovative Development in the Regions of the Russian Federation: Features and Basic Digital Tools
1 Introduction
2 Methodology
3 Results
4 Conclusions
References
Transformation of Financial Management Processes in the Digital Space
1 Introduction
2 Methodology
3 Results
4 Conclusions/Recommendations
References
Formation of a Power Supply System for Auto-Electric Transport in Russia
1 Introduction
2 Materials and Methods
3 Results
4 Conclusion
References
Industry 4.0: Features of Development in Russia
1 Introduction
2 Methodology
3 Results
3.1 Industrial Internet of Things
3.2 Transformation of Producer Behavior Patterns
3.3 Transformations in Producer – Consumer Relationship
3.4 Network Form of Business Organization
3.5 The Risks and Threats of Digitalization
4 Conclusion
References
Training of Innovative Personnel in the Digital Economy
1 Introduction
2 Materials and Methods
3 Results
4 Conclusions
References
Information Protection of Automated Systems Using Artificial Intelligence Methods
1 Introduction
2 Materials and Methods
3 Results
4 Conclusion
References
Concept of “Smart City” in the Framework of Scientific Discourse
1 Introduction
2 Background and Methodology
3 Results
4 Conclusions
References
Peculiarities of Organization of Financial and Accounting Processes in Digital Economy
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Impact of the Digital Economy on the Legal Regulation of Labor Relations and Protection of Labor Rights
1 Introduction
2 Materials and Methods
3 Results
4 Conclusion
References
The Problem of Preservation of Unique Biodiversity of Sarkent as a Source of Green Tourism
1 Introduction
2 Conclusions
References
Optimal Strategy of Storage Unit Selection for Stand-Alone Hybrid Power Systems
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Research and Modeling of Industrial and Social Processes to Improve the Safety of Human Life
1 Introduction
2 Materials and Methods
2.1 Time Series Mathematical Model
2.2 Continuous Wavelet Transform
2.3 Modified Combined Processing Approach for Time Series Analysis
3 Results
3.1 Time Series Analysis by Gender
3.2 Time Series Analysis by Months
3.3 Time Series Analysis by Day of the Week
3.4 Time Series Study by Age
4 Conclusions
References
Economic and Institutional Aspects of Environmental Protection
1 Introduction
2 Methodology
3 Results
4 Conclusion
References
The Model of Company Security in Crisis Conditions
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Standard of Living of the Russian Population: Challenges and Alternative Solutions
1 Introduction
2 Materials and Methods
3 Research Results
3.1 The Dynamics of Russia Population Income
3.2 Differentiation of Incomes of the Population by Regions
3.3 The Role of the Government Policy and the Ways to Prevent Real Incomes from Being Reduced
4 Conclusion
References
Special Aspects and Problems of Forest Utilization in the Legislation of Member States of the EEU
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Main Trends and Directions of Innovative and Sustainable Development of Housing Construction
1 Introduction
2 Methodology
3 Results
4 Conclusions/Recommendations
References
Assessment of the Socio-Economic Situation of the Regions as a Tool for Realizing the National Development Goals of Russia
1 Introduction
2 Materials and Methods
3 Results
4 Conclusion
References
Assessment of Changes in the Quality of Atmospheric Air on the Territory of Khabarovsk Krai
1 Introduction
2 Background and Methodology
3 Results
4 Conclusions
References
Introduction of the Joint Value Creation Approach in the Region’s Logistics Services Market
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Business Efficiency Strategies Based on Value Engineering (VE)
1 Introduction
2 Materials and Method
3 Results
3.1 Implementation Options
3.2 Implementation Terms
4 Conclusion
References
Managing the Organizational Culture of an Enterprise is One Way to Improve Its Efficiency
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Transformations of the Modern Russian Economy: Causes, Trends, Possible Alternatives
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Possible Medium-Term Scenarios of Dynamics of Russia’s Energy Resource Exports After the Economic Crisis of 2020
1 Introduction
2 Materials and Methodology
3 Results
3.1 Negative Scenario of Export Dynamics Development
3.2 Baseline Scenario of Export Dynamics Development
3.3 Optimistic Scenario of Export Dynamics Development
4 Conclusions
References
Accounting and Economic Aspects of Client Management at Service Enterprises
1 Introduction
2 Materials and Methods
3 Results
4 Conclusion
References
Accounting and Analytical Indicators of a Decision Support System at Service Industry Enterprises
1 Introduction
2 Materials and Methods
3 Results
4 Conclusion
References
Implementing an Integrated Approach to Ensure the Economic Security of an Enterprise
1 Introduction
2 Materials and Methodology
3 Results
4 Conclusions and Recommendations
References
Risk Engineering in Investment and Construction Activities
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Artificial Intelligence as a Result of Intellectual Activity: Accounting and Tax Aspects
1 Introduction
2 Methodology
3 Results
4 Conclusion
References
Optimization of Herd Structure as an Important Reserve for Increasing the Efficiency of Horse Breeding
1 Introduction
2 Background and Methodology
3 Results
4 Conclusions
References
Multivariability of the Design Approach to the Concept of Restructuring in Construction
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
General Provisions of the Mediation Institution in Criminal Proceedings of European States
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Socio-economic and Legal Factors of Recognition and Enforcement of the Constitutional Right to Education in Russia
1 Introduction
2 Materials and Method
3 Results
4 Conclusions/Recommendations
References
Trade and Economic Cooperation Within BRICS: Actual Problems and Prospects
1 Introduction
2 Methodology
3 Results
4 Conclusion
References
Assessment of the State and Prospects of Development of Cross-Country Entrepreneurship of Small and Medium-Sized Businesses in the Stavropol Territory
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
University Modernization in the Conditions of Industrialization of Production and Intelligent Machines
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Educational Inequality in Russian Regions: Mathematical Modeling
1 Introduction
2 Materials and Methods
3 The Research Results and Discussion
4 Conclusion
References
Human Capital as a Driver for Improved Performance of the Innovations-Intensive Construction Cluster
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Key Competencies in Pedagogical Activities
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Analysis of Risk Assessment Models Used to Implement the Labor Safety Management System Algorithm
1 Introduction
2 Materials and Methods
3 Results
4 Conclusion
References
Development of HR-Management Tools for an Innovation-Oriented Organization Using System Analysis
1 Introduction
2 Materials and Methods
3 Results
4 Conclusion/Recommendations
References
Managing Human Resources in the Digital Economy
1 Introduction
2 Materials and Methods
3 Results
4 Conclusion
References
The Role of the Culture of Economic Security in the Development of the Enterprise
1 Introduction
2 Methodology
3 Results
4 Conclusion
References
Adaptation of the Priority Model of Public-Private Partnership to the Conditions of Digitalization of the Russian and Abkhazian Economies
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Tools for Interaction Between Government and Business Structures in Russia and Belarus in the Context of Digitalization
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Development of Innovative Methods of Lead Management in Retail Trade in the Region
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
From the Construction of Schools to the Digitalization of Education: Critical Issues of Education in the Caucasus in the Conditions of Integration of Educational Spaces in Russia and South Ossetia
1 Introduction
2 Materials and Method
3 Results
4 Conclusion
References
Meaning-Making Orientations for the Self-development of a Future Teacher in an Integrative Educational Environment
1 Introduction
2 Methodology
3 Results
4 Conclusion
References
Features of Application of Machine-Readable and Algorithmic Language in the Contemporary Budget Law
1 Introduction
2 Materials and Method
3 Findings
4 Conclusion
References
Future Challenges on the Way to Industrial Development of Equipment and Technologies in the Digital Economy and Industry 4.0 (Conclusion)
Author Index