Interdisciplinary Research of New Technologies, Their Development and Application
Contents
List of Contributors
New Technologies in Mechanical Engineering, Metallurgy, Mechatronics, Robotics and Embedded Systems
Dissemination of Patents of the Base Technologies of the Fourth Industrial Revolution - Industry 4.0
Abstract
1 Introduction
2 Dissemination of Patents and Technologies that are the Basis of Industry 4.0 Worldwide
3 Overview of the Dissemination of Industry 4.0 Patents in the European Union
4 Conclusion
References
Self-engineering – Technological Challenges
Abstract
1 Introduction
1.1 Overview of Through-Life Engineering Services (TES)
2 What Is Self-engineering?
2.1 Definition
2.2 Processes Involved
2.3 Summary of Key Methods
3 Current Technology
3.1 Self-healing Materials
3.2 Self-reconfiguring Electronics
3.3 Self-repairing Systems
3.4 Self-adapting Robots
3.5 Robotic Maintenance and Inspection
4 Self-engineering in Biology
4.1 Bioinspired and Biomimicry Design Process
4.2 Examples of Biology Inspired SE Work
5 Technological Challenges and Research Questions
5.1 Monitoring
5.2 Trigger
5.3 Response
6 Evolution of Self-engineering
6.1 Evolving Automatic Control (Industry 4.0)
6.2 Evolving Beyond Automatic Control
7 Summary
References
A Reinforcement Learning Controller for the Swing-Up of the Furuta Pendulum
Abstract
1 Introduction
2 Research Methodology
3 Numerical Results
4 Conclusions
References
Impact Force Localization Using Eigenfrequency Measurement in Plane Frames
Abstract
1 Introduction
2 Structural Vibrations
2.1 Governing Equations
3 Fem Model of the Plane Frame
4 Experimental Research
5 Conclusions
References
Design and Testing of a Two-Stage Water-Hydraulics Pressure-Relief Valve
Abstract
1 Introduction
1.1 Pressure-Relief Valve
1.2 Water as a Hydraulic Pressure Medium
2 Design of a Two-Stage WH Pressure-Relief Valve
3 Experimental
3.1 Specimen Pressure-Relief Valve
3.2 Test Rig
4 Results
5 Conclusion
References
Integration of CAD, MBD, and FEA Programs for the Topology Optimization of Aircraft Components
Abstract
1 Introduction
2 Research Methodology
3 Numerical Results
4 Conclusions
Acknowledgments
References
Technological Features of Locating Charts in Fixture Design
Abstract
1 Introduction
2 Literature Review
3 Research Methodology
4 Results
5 Conclusions
References
Analysis of Accuracy and Adequacy of Dynamic Models of Objects
Abstract
1 Introduction
2 Formulation of the Problem
3 Methods and Results of Research
4 Conclusions
References
Conditions on Full Rotation of the Drive Member of the Four-Joint Mechanism
Abstract
1 Introduction
2 Analysis of the Problem
3 Conclusion
References
Achieving Crowning Contact of Spur Bevel Gears Through Deliberately Introduced Mounting Errors
Abstract
1 Introduction
2 Determination of the Initial Contact Point of the Teeth and the Value of the Crowning Magnitude
3 Bevel Gear Assembly Method
4 Conclusion
References
Integrated Development and Design of Gears Reduction Drive
Abstract
1 Introduction
2 Methodology for Development and Design of Gears Reduction Drive
2.1 Calculations of Gears Reduction Drive
2.2 3D Geometrical Parametric Modeling of Gears Reduction Drive
2.3 Simulation of Working Principles of Gear Reduction Drive
3 3D Printing and Augmented Reality
4 Conclusions
References
Development of Linear Servo Hydraulic Drive for Material Testing
Abstract
1 Introduction
2 Device Design
2.1 Device Construction
3 Hydraulic System
4 Control System
4.1 Control Program (PLC)
4.2 User Interface (HMI)
5 Device Operation – Results
6 Conclusion
References
Structural Analysis of Direct Passive Pressure Reducing Valves Using Modified Kinematic Graphs
Abstract
1 Introduction
2 Theoretical Research
2.1 Literature Review
2.2 Research Methodology
3 Results and Discussion
4 Conclusion
References
The Study of the Elastic Characteristics of the Coupling with Nonlinear Feedback When Starting the Motor
Abstract
1 Introduction
2 Scientific Research
2.1 Review of Modern Information Sources on the Subject of the Paper
2.2 Objectives and Problems of Research
2.3 Main Material Presentation
3 Conclusion
References
Finite Element Analysis (FEA) of Automotive Parts Design as Important Issue of Assembly Technology Designing of Passenger Vehicle
Abstract
1 Introduction
2 Braking and Steering System of Passenger Vehicle
3 Description of the Finite Element Model
4 FE-Simulation Research and Experimental Results
5 Conclusion
References
Development of Aircraft Mechanical Systems and Mechatronics Modeling
Abstract
1 Introduction
2 Aircraft Hydraulics System
2.1 System Development
2.2 Hydraulics System Characteristics
2.3 Modeling and Simulation
2.4 Examples
3 Conclusion
Note
References
Chair Production and Robots Usage
Abstract
1 Introduction
2 Chair Construction and Processing
3 Robots in Chair Production
4 Conclusions
References
Programming Robot KUKA KR 16-2 for a Palletizing Application
Abstract
1 Introduction
2 Development and Application of Palletization
3 Robot KUKA KR16-2
4 Programming Robot in the Palletization Process
4.1 KUKA Robot Programming
4.2 Analysis of the Palletization Process
5 Conclusion
References
Reinforcement Learning Based Human-Prosthetic Robot Interaction Control in Movement Therapy
Abstract
1 Introduction
2 Reinforcement Learning
3 Interactive Active Compliance Control Strategy
3.1 Determination of Human-Robot Interactive Model
3.2 Admittance Parameter Adjustment Algorithm Based on Reinforcement Learning
4 Experimental Results
4.1 Experimental System and Protocol
4.2 Active Rehabilitation Training Experiment
5 Discussion and Conclusion
References
Modeling, Analysis and Simulation of Work for the Punching and Cutting Operations on Inner Plate of the Front Car Door
Abstract
1 Introduction
2 Processing by Punching and Cutting
2.1 Construction Parts of the Tool
2.2 Calculation of the Punching and Cutting Force
3 3D Geometric Modeling and Setting of Parameters of the Tool
4 Analysis and Simulation of Operation of the Tool
5 Conclusion
References
Intelligent CAD Systems for Generation G Code
Abstract
1 Introduction
2 Intelligent Model of G Code
3 Conclusion
References
Power Parameters of Micro-cutting During Finishing Anti-friction Non-abrasive Treatment
Abstract
1 Introduction
2 Literature Review
3 Research Methodology
4 Results
5 Conclusion
References
Overview of Mobile Applications for CNC Programming
Abstract
1 Introduction
2 Mobile Applications for CNC
2.1 Software with Simulation
2.1.1 CNC Simulator Free
2.2 CNC Engraving Software
2.2.1 Text to CNC
2.2.2 CNC Tools
2.3 Educational Software
2.3.1 CNC Program Example
3 Conclusion
References
Modelling of Cutting Forces in Hard Steel Turning
Abstract
1 Introduction
1.1 Cutting Force When Machining Hardened Materials
2 Modeling the Cutting Process
3 Experiment
3.1 Measurement Results
4 Modeling the Output Performance of the Machining Process
4.1 View of the Data Obtained from the Experimental Three-Factor Plan
4.1.1 Three-Factor Model for Main Cutting Resistance for HM Cutting Insert with \left( {\gamma = 0^{ \circ } , \alpha = 7^{ \circ } , \lambda = - 6^{ \circ } } \right)
5 Discussion
6 Conclusion
References
Hardness Prediction Model for Drawing with Wall Thickness Reduction
Abstract
1 Introduction
2 Influence of Reducing Surface Size Decrease on Surface Strength Growth
3 Hardness Prediction Model
4 Conclusion
References
The Use of Digital Factory Technologies in Slovenian Manufacturing Companies
Abstract
1 Introduction
2 Industry 4.0 Readiness Index
3 European Manufacturing Survey
4 Results and Discussion
4.1 Adoption of AMT in Slovenian Manufacturing Companies
4.2 Industry 4.0 Readiness Index in Slovenian Manufacturing Companies
5 Conclusions
References
Autonomous Work Systems in the Cyber-Physical Production Systems Concept
Abstract
1 Introduction
2 Cyber-Physical Production Systems
3 Autonomous Work Systems
4 Industrial Example and Potential Application
4.1 High Pressure Die Casting (HPDC)
4.2 The Model of AWS for a Die Casting Based on the CPPS Concept
5 Conclusion
References
New Technology of Printed Circuit Board Microdrilling
Abstract
1 Introduction
2 Experimental Equipment
3 Experimental Results
4 Conclusion
References
Determination of Relaxation and Creep Modulus of Polymer Materials Obtained by 3D Printing
Abstract
1 Introduction
2 Theoretical Background
2.1 Nonlinear Regression
2.2 Examples of Application
2.2.1 Determination of Relaxation Modulus
2.2.2 Determination of the Creep Compliance
3 Conclusion
References
Additive Manufacturing of the Superalloy Turbine Blades by Selective Laser Melting: Surface Quality, Microstructure and Porosity
Abstract
1 Introduction
2 Experimental Procedures
2.1 Powder Material
2.2 Selective Laser Melting
2.3 Specimen Surface Characterization
3 Results
3.1 Surface Texture
3.2 Microstructural Characteristics
3.3 Porosity
4 Conclusion
References
Importance of Additive Manufacturing Technology for Startup Launching: A Case Study
Abstract
1 Introduction
2 Softwares, Printers and Materials Used in Additive Manufacturing Process
3 Modeling and Development of a 3D Printed Product
4 Startup Launching Using Additive Manufacturing Technology
5 Conclusion
Acknowledgment
References
Reverse Engineering Using 3D Scanning and FEM Analysis
Abstract
1 Introduction
2 3D Scanning
3 Cad Modeling
4 Fem Analysis
5 Conclusion
References
Microstructure Assessment of Steel for Elevated Temperatures by the Replica
Abstract
1 Introduction
2 Technique of Surface Examination by Metallographic Replica
3 Microstructural Damage by Creep
4 Material Data
5 Conclusion
References
Application the Method Digital Image Correlation for Measurement of Small Deformations at the Beginning of Plastic Flow of Materials
Abstract
1 Introduction
2 Experimental
3 Results and Discussion
4 Conclusion
Acknowledgements
References
Development of the Wasteless Technology of Processing of Steel-Smelting Slags
Abstract
1 Introduction
2 Fractional Analysis of Steel-Smelting Slag
3 Determination of Particle Size Distribution of Steel-Smelting Slag
4 Definition of the Key Process Parameters of Allocation of Valuable Components Using Differences in Their Physic-Mechanical Properties
5 Conclusion
References
HSLA Steel - Simulation of Fatigue
Abstract
1 Introduction
2 ON Nionikral 70 Steel
3 On HCF and LCF
3.1 Testing of LCF and HCF of NN-70
3.2 Preparation for Static and Fatigue FEM Calculation in SolidWorks
4 Conclusion
Acknowledgements
References
Optimization of Polychlorotrifluoroethylene Processing Technology by the Response Surface Methodology
Abstract
1 Introduction
2 Materials and Methods
2.1 Materials
2.2 Methods
3 Results and Discussion
4 Conclusions
References
Procedure for Determining the Wind Tunnel Blockage Correction Factor
Abstract
1 Introduction
2 Blockage Effects
3 Methods for the Blockage Effect Corrections
3.1 Basic Parameters for the Wind Turbine Characteristics Description
3.2 Existing Methods for Determining the Blockage Correction Factor
4 Determining the Blockage Effect Correction Factor
4.1 Tests with Different BR Values
4.2 Determination of Dimensionless Parameters for Aerodynamic Similarity
5 Conclusion
References
Effect of Rear Spoiler Shape on Car Aerodynamics and Stability
Abstract
1 Introduction
1.1 3D Car Models
2 Modeling Using Finite Elements
3 Results and Discussions
4 Conclusions and Remarks
Acknowledgement
References
Ionic Liquids as Wide Operating Temperature Range Lubricant
Abstract
1 Introduction
2 Ionic Liquids as Lubricants
3 Kinematic Viscosity and Viscosity Index Tests
4 Test Results
5 Conclusion
Acknowledgment
References
Simulation of Vehicle’s Inertia Using a Flywheel Mass to Test Disc Brake System
Abstract
1 Introduction
2 Literature Review
3 Installation for Disc Brake Analysis and Flywheel Mass Position
4 Methodology
5 Results and Discussion
6 Conclusion
References
Engine Speed and Load Effect on the Sealing Capacity of a Piston Ring-Pack
Abstract
1 Introduction
2 Approach for Ring and Gas Dynamics
3 Simulation
4 Results and Discussion
4.1 Idle
4.2 30% Load
4.3 50% Load
4.4 70% and 100% Load
5 Comparative Analysis
6 Conclusions
Conflict of Interests
References
Application of RFID Technology for Better Efficiency of Resource Planning
Abstract
1 Introduction
2 Trends in Literature
3 Enterprise Resource Planning
4 RFID Technology
5 Enterprise Integration
6 Conclusion
References
Retrofitting Techniques for Agricultural Machines
Abstract
1 Introduction
2 Literature Review
3 Research Methodology
4 Results
5 Conclusions
References
Improving the Automated Design Efficiency: A Case Study
Abstract
1 Introduction
2 Methods
3 Results
4 Conclusion
References
Monitoring of Physical Properties of Transmission-Hydraulic Fluid by Simulating the Operation Load of Agricultural Machine’S Hydraulic Pump Under Laboratory Conditions
Abstract
1 Introduction
2 Materials and Methods
3 Results and Discussion
4 Conclusions
Acknowledgments
References
Computer Science, Information and Communication Technologies, Control Systems
PSO Optimized Fuzzy Controller for Mobile Robot Path Tracking
Abstract
1 Introduction
2 Mobile Robot Kinematic Model
3 Fuzzy Logic Controller for Mobile Robot Path Tracking
4 Particle Swarm Optimization (PSO)
5 Design of PSO Optimized Fuzzy Controller for Path Tracking
6 Conclusion
References
Theoretical and Practical Aspects of Internet of Things (IoT) Technology
Abstract
1 Introduction
2 Characteristics of IoT Concepts
3 IoT Architecture
4 Method of Functioning IoT
5 Technologies Allowing the Implementation of the IoT
6 Areas and Reasons for the Application of IoT
7 Conclusion
References
Technosociality and the Rise of the Network Society
Abstract
1 Introduction
2 Technoculture, Technosociality and Irreversible Digitization of the Society
3 Conclusion
References
Cyber Security Analysis of the Electric Power Information System in Montenegro
Abstract
1 Introduction
2 Models of Cyber Protection of Electric Power Systems at the Global Level
2.1 Electricity Subsector Cybersecurity Capability Maturity Model (ES-C2M2)
2.2 ICS-SCADA Cyber Security Maturity Assessment Model
2.3 3 × 3 Matrix Model by Eric Knapp
2.4 SCADA Security Maturity Model
2.5 Electricity Subsector Cybersecurity Risk Management Model
2.6 Comparison of Presented Protection Models
3 Feature Model of Organizing the Security System of Electric Power System in Montenegro
4 Analysis of the Cyber Security Conditions in the Electric Power System in Montenegro
5 Conclusion
References
Nature-Inspired Cryptoanalysis Methods for Breaking Vigenère Cipher
Abstract
1 Introduction
2 The Vigenere Cipher
3 Nature-Inspired Algorithms
3.1 Differential Evolution
3.2 Particle Swarm Optimization
3.3 Firefly Algorithm
3.4 Artificial Bee Colony Algorithm
3.5 Cuckoo Search
4 Nature-Inspired Cryptoanalysis Methods
5 Experiment
6 Results
7 Conclusion
Acknowledgements
References
Using a Chaos Generator to Achieve Cryptographic Strength Parameters Close to Absolutely Stable Ciphers
Abstract
1 Introduction
2 The Data Protection By Using the “Chua’s Circuit” Chaos Generator
2.1 Overview of Existing Solutions and Programs
2.2 A Cryptosystem Based on a Mathematical Model of Chaotic Oscillations Generated on the Basis of Differential Equations
3 Conclusion
References
The Architecture of Fuzzy Logic Automat of Parallel Action for the Intelligent Smart Grid Networks
Abstract
1 Introduction
2 Question State Analyses
3 Definition the Goal
4 Basic Materials
5 Conclusion
References
Green Technology Approach to Comb-Based Decimators Design
Abstract
1 Introduction
2 Improving Two-Stage Comb Structure
2.1 Two-Stage Comb Structure
2.2 Placing the Zeros into Comb Folding Bands
3 Proposed Filter
3.1 Transfer Function
3.2 Choice of Parameters
3.3 Structure
4 Comparisons with Methods from Literature
4.1 Comparison with Method in [4]
4.2 Comparison with Method in [8]
5 Conclusion
References
Determination of the Sampling Interval of Time Series of Measurements for Automation Systems
Abstract
1 Introduction
2 Research Methodology
3 Experiments
4 Conclusion
References
Fuzzy Model of Quality Control of the Finished Software Product
Abstract
1 Introduction
2 Analysis of Research and Publications
2.1 Software Product Quality Assessment Model
2.2 Experiment on Evaluating the Quality of a Software Product
3 Conclusion
References
Parallel Processing of HTTP Requests in E-Commerce: A Modeling Framework
Abstract
1 Introduction
2 Client/Server Interaction Diagrams in E-Commerce
3 Non-Markovian Stochastic Petri Nets
4 The Modeling Framework
5 Conclusion
References
A Dynamic Call Admission Control Scheme and Performance Modeling for 4G LTE Networks
Abstract
1 Introduction
2 Related Work – Historical Development of CAC Schemes
3 Proposed Work
4 Real-Time Simulation
5 Results and Discussion
6 Conclusion
References
Statistical Analysis and Modeling of Global Innovation Index (GII) of Serbia
Abstract
1 Introduction
2 Data and Methods
3 Results and Discussions
4 Conclusion
References
AI Enhanced Services in Person-Centred Care in Neurology
Abstract
1 Introduction
2 Key Challenges in PCC Development
3 Potentials of Using AI in PCC
4 Innovative Approach in PCC Neurology Lab
5 Conclusion
Acknowledgement
References
Montenegrin Dictionary Based Brute Force Attack
Abstract
1 Introduction
1.1 Tools for Brute Forcing
2 Statistical Analysis of Data Regarding Passwords
3 Creation of a Montenegrin Dictionary Based Brute Force Attack
3.1 Special Dictionary List
4 Conclusion
Acknowledgment
References
Applications eDaljinar and mDaljinar
Abstract
1 Introduction
2 About Application eDaljinar
2.1 Description of Work of the Application eDaljinar
3 About Mobile Application mDaljinar
3.1 Description of Work of Mobile Application mDaljinar
4 Conclusion
References
Intelligent Transport Systems, Logistics, Traffic Control
Cybersecurity of Autonomous and Connected Vehicles
Abstract
1 Introduction
2 Examples of Cyber Attacks on Its Infrastructure and Autonomous Vehicles
3 Assessment of the Level of Attack Attachment Towards Intelligent Transport System
4 The Concept of Improving Cybersecurity of Intelligent Transport Systems
5 Conclusion
Acknowledgment
References
Investigation of Vehicle Driving Cycles in Urban Traffic Condition
Abstract
1 Introduction
2 Measurements and Determination of Driving Cycles
3 Conclusion
References
Improvement of Variable Speed Limit Control Effectiveness in Context of Connected Vehicles
Abstract
1 Introduction
2 Variable Speed Limit Control
3 Connected Vehicles
4 Intelligent Speed Adaptation
5 Conclusion
Acknowledgment
References
Autonomous Vehicles in Urban Traffic
Abstract
1 Introduction
2 Overview of Autonomous Vehicle Technology
2.1 Levels of Autonomy
2.2 Autonomous Vehicle Technology
3 Impact of Autonomous Vehicles on Urban Transport
3.1 Basic Features
3.2 Autonomous Urban Public Transport
4 Road Infrastructure and Autonomous Vehicles
5 Conclusion
Acknowledgment
References
New Technologies for Improving Driver Response Efficiency in Risk Prevention from Traffic Environment
Abstract
1 Introduction
2 Abilities of Timely Reaction in Traffic
3 The Importance of Visual Abilities in the Driver’s Timely Response Function
4 The Possibilities of Using New Technologies to Improve Driver Response Efficiency in Prevention of Traffic Risk
4.1 Possibilities of Application of the System for the Research in Education of Drivers and Improving the Efficiency of Reaction on Risks in Traffic
4.2 Testing and Analysis of the Driver’s View in Correlation with the Driver’s Response to Potential Risks from the Traffic Environment
5 Conclusion
References
Predictive Model of Personalization of Services of Automated Mobility Based on the Records of User Movement in Mobile Networks
Abstract
1 Introduction
2 Related Works
3 System of Automated Mobility
4 The Problems of Personalization of Automated Mobility Services
5 Identification of Movement Data in Mobile Networks
6 Designing a Predictive Model the Personalization of Automated Mobility Services
6.1 Creating of Predictive Model
6.2 Benefits of Personalized Model of Automated Mobility Services
6.3 Enhancement of the Proposed Predictive Model Using Artificial Intelligence
7 Conclusion
References
Logistics Optimization of Agricultural Products Supply to the European Union Based on Modeling by Petri Nets
Abstract
1 Introduction
2 Literature Analysis
3 Design of Model
4 Conclusion
References
Directions for Quality Assurance of Specialists Training in Logistics and Transport Spheres from a Competence Approach Perspective
Abstract
1 Introduction
2 Literature Review
3 Aim and Research Tasks
4 Activities to Enhance Competencies of Logistics and Transport Professionals and to Ensure Their Training Qualities
5 Conclusion
Mathematical Model of Reverse Loading Advisability for Trucks Considering Idle Times
Abstract
1 Introduction
2 Literature Analysis
3 Design of Mathematical Model
4 Conclusion
References
Model for Choosing Rational Technology of Containers Transshipment in Multimodal Cargo Delivery Systems
Abstract
1 Introduction
2 Literature Review
3 Aim and Research Tasks
4 Design of Mathematical Model
5 Research Results
6 Conclusion
References
A Review of Enabling Technologies and Solutions for IoT Based Smart Warehouse Monitoring System
Abstract
1 Introduction
2 A Warehouse Monitoring and Control
3 IoT Based System for Warehouse Monitoring and Control
3.1 IoT System Structure and Technology Stack
3.2 The Procedure Algorithm of IoT System
4 Conclusion
References
Theoretical Aspects of Diagnosing of Car Engine at the Time of Acceleration
Abstract
1 Introduction
2 The Results of the Research
2.1 Theoretical Substantiation
2.2 The Results of the Experiment
2.3 Validation
2.4 Evaluation Criteria
3 Conclusion
References
New Technologies in the Field Energy: Renewable Energy, Power Quality, Advanced Electrical Power Systems
Analysis of Groundwater Source Heat Pump Operation with Improvement Suggestions
Abstract
1 Introduction
2 Groundwater Source Heat Pumps
3 Selected Type of Heat Pump
4 Experimental Research
5 Conclusion
References
Air Staging and Reburning to Achieve Low Emissions During Co-firing Coal and Biomass
Abstract
1 Introduction
2 Fuel Test Matrix, Test Regimes and Laboratory Plant
3 Results of the Research: Emission of Flue Gas Components
4 Conclusion
Acknowledgements
References
Projects of Renewable Energy Resources: An Analytical Overview of the Windfarm’s Electricity Generation on the Hillside Možura
Abstract
1 Introduction
2 Analytical Overview of the Project of Wind Generator’s Farm on Možura (Montenegro) and Its Specifications
2.1 Project Description and Its Baseline Scenario
2.2 Long-Term Energy Supply in Montenegro
2.3 Investments’ Analysis of Možura Wind Farm Project
2.4 The Generated Noise Level
2.5 THE CO2 Emission Reductions
3 Conclusion
Acknowledgements
References
Development of Hybrid System for Air-Conditioning of Almost Zero Energy Buildings
Abstract
1 Introduction
2 Heat Energy Production
2.1 Heat Pump
2.2 Thermal Collectors
3 Electric Energy Production
3.1 Photovoltaic Plant
3.2 Small Wind Turbine
4 System Components Integration
5 System Efficiency Analysis
6 Conclusion
References
New Technology of Arterial Pipeline Tubes Failure Prediction
Abstract
1 Introduction
2 Experimental
3 Theoretical Aspects
4 Methodology Aspects
5 Experimental Results in Atmosphere and in Vacuum
6 The Tube’s Sheet Rolling Influence on Steel Properties
7 Conclusion
References
Functional Modeling of the Means for Heat Consumption Monitoring During Its Design Using the Information
Abstract
1 Introduction
2 Related Work
3 Research Methods
4 Results
4.1 Conceptual Model of the Information Technology for Heat Consumption Monitoring
4.2 Functional Modeling of Information Technology for the Indoor Temperature Regulation
4.3 Structural Model of the Controller
4.4 Hardware
4.5 Software
5 Conclusion
References
Renewable Energy Sources in Construction of Energy Efficient Residential Buildings
Abstract
1 Introduction
2 Integral Solution of Tin Roofing with Photovoltaic Cells
3 Comparison and Analysis of Classical and Integrated Roof Coverings (Technical and Economical)
3.1 Technical Analysis and Comparison
3.2 Economical Analysis and Comparison
4 Conclusion
References
Computer Studies of the Tightness of the Drill String Connector Depending on the Profile of Its Tapered Thread
Abstract
1 Introduction
2 Literature Review
3 Research Methodology
3.1 The Model of the Hydraulic Fluid
3.2 The FEM Model of the Screw Channel
4 Results
4.1 Geometric Models of the Cross Section of the Screw Channel
4.2 Pressure Drop Models
4.3 Models of the Distribution of Fluid Speed in the Screw Channel
4.3.1 The Models of Average Velocity Distribution of Fluid Speed in the Screw Channel
4.3.2 The Models of Velocity Distribution of Fluid Speed in the Reduced Screw Channel
5 Conclusions
References
Trend Analysis of Production and Distribution of Wing Pumps: A Case Study of Firm PPT-Trstenik (Serbia)
Abstract
1 Introduction
2 Trend of the Development and Production of Pumps in the World
3 Materials and Methods
4 Results and Discussions
5 Conclusion
References
New Technologies in Agriculture, Ecology, Chemical Processes
Carbon Based Aerogels and Xerogels for Removing of Toxic Organic Compounds
Abstract
1 Introduction
1.1 Methods of Drying
2 Removing of Toxic Organic Compounds by Adsorption
2.1 Toxic Organic Compounds
2.2 Adsorption of Organics by Carbon Aerogels
2.3 Adsorption of Organics by Carbon Xerogels
3 Conclusion
References
Supercritical Fluid Extraction of Lycopene and Omega-3
Abstract
1 Introduction
2 Supercritical Fluids Properties
2.1 Characteristics of Supercritical CO2
3 Supercritical CO2 Extraction of Lycopene from Tomatoes in the Presence of Vegetable Oil as a Co-solvent
4 Extraction of Fish Oil Rich in Omega-3 from Fish by-Products
5 Results
6 Conclusions
References
Assessment of Cancerogenic Health Risk of as, Cd, Pb and Ni from Tobacco Smoke
Abstract
1 Introduction
2 Methodology
3 Results and Discussion
4 Conclusion
References
Application of Eco-Compatibile Technology – Phytoremediation – Case Study with Phytoaccumulator Plantago lanceolata
Abstract
1 Introduction
2 Phytoremediation
2.1 Calculation Phytoaccumulation Factor
3 Conclusions
References
Human Risk Assessment Based on the Content of Inorganic and Organic Pollutants in Sarajevo’s Playgrounds
Abstract
1 Introduction
2 Materials and Methods
2.1 A Non-carcinogenic Risk Assessment
3 Results and Discussion
4 Conclusion
Acknowledgements
References
Influence of Initial Alcohol Content in Distillate on Distribution of Methanol and Higher Alcohols During Redistillations
Abstract
1 Introduction
2 Material and Working Methods
3 Results of Work and Discussion
4 Conclusion
Conflicts of Interest
References
Comparative Composition of Spreča River Fauna (Bosnia and Herzegovina)
Abstract
1 Introduction
2 Materials and Methods
3 Results and Discussion
3.1 Macroinvertebrate Diversity of the Spreča River Watershed
3.2 Diversity of Ichthyopopulations of the Water Catchment of the River Spreča
4 Conclusion
References
A Two-Stage Multi Criteria Decision Making in Crop-Livestock Farming
Abstract
1 Introduction
2 Materials and Methods
3 Results and Discussion
3.1 Mathematical Model
3.2 LP Model Solutions
3.3 Ranking Alternatives by TOPSIS
4 Conclusions
References
New Technologies in Civil Engineering, Architecture, Quality Control
Proposed New Quality Control Plan Procedure for Road Bridges
Abstract
1 Introduction
2 The Methodology Developed in COST TU1406
3 Relating Different Maintenance Periods
4 Practical Application
5 Conclusion
References
Problem of Characteristic Snow Load in the Eastern Part of Bosnia and Herzegovina
Abstract
1 Introduction
2 Snow Data
2.1 Snow Data Introduction
2.1.1 Heights of Snow
2.1.2 Height of the Water in the Snow (VSV)
2.1.3 Snow Density
2.2 Characteristic Snow Load
2.3 Snowload in the Eastern Part of Bosnia and Herzegovina
3 Analysis of Snow Cover in Eastern Part of Bosnia and Herzegovina
4 Conclusion
References
Influence of Wind Load to the Billboards at Mostar Valley
Abstract
1 Introduction
2 Billboards Calculation Under Wind Load in Mostar Valley
2.1 Wind Load Calculation
2.2 Dimensioning of Billboard Profile
3 Metal Sheets Calculation
4 Structural Analysis of Billboards Cases I–IX for Wind Speed Increasing
4.1 Equations from Diagrams for Different Billboards Area Mmax and Increasing Wind Speed V0 = 35–50 m/s
4.2 Calculation of Wpot over Diagrams for Different Billboards Area and Increasing Wind Speed V0 = 35–50 m/s
4.3 Examples of Using Equations for Calculation Mmax and Wpot
5 Conclusion
References
Presentational Advances in User-Based Design Processes in Architecture and Civil Engineering: Virtual Reality Dimension
Abstract
1 Introduction
2 Problem Statement
3 Virtual Reality (VR)
3.1 The Hardware
3.2 CAVE (Cave Automatic Virtual Environment) and HMD (Head Mounted Display) Systems
3.3 The Software
4 Application of VR in Architectural and Engineering Design Practices
4.1 Design Process
4.2 Visualization
4.3 Collaboration and Communication
4.4 Education and Training
4.5 Virtual Prototyping and Walkthrough
5 Conclusion
References
Using the Semi-professional UAV System in Surveying the Medium Size Area of Complex Urban Surface
Abstract
1 Introduction
2 Semi-professional Unmanned Aerial Vehicle DJI Phantom 4 Pro
3 Methodology and Data
4 Results and Discussion
4.1 Accuracy Analysis
5 Conclusion
References
Wood as a Building Material – Renewable Source to Preserve the Environment and Health in B&H
Abstract
1 Introduction
1.1 EU Goals and Activities and the “Renew School” Project in the EU
1.2 Bosnia and Herzegovina Toward EU Membership; Potentials, Resources and Current Practice in the Renovation of Schools
2 Methodology
2.1 The Description of the Construction – the “Renew School” Project in the EU
2.2 The Description of the Construction – the “Conventional Façade” in B&H
3 Results
4 Discussion
5 Conclusion
References
The Use of Green Materials in Architectural and Civil Design and the Success of Construction Projects: Case Study of Bosnia and Herzegovina
Abstract
1 Introduction
2 Literature Background
2.1 Construction Project Success and the Iron Triangle
2.2 Architectural and Civil Design and Their Impact on the Project Success Elements
2.3 Sustainable Construction
2.4 Green Materials and Buildings
3 Methodology
4 Results and Discussion
5 Conclusion
References
Towards Innovative Solar Energy Applications: New Urban Furniture
Abstract
1 Introduction
2 Example of Well-Designed Solar Energy-Integrated Urban Solution
2.1 Application
3 Montenegrin Smart City Experience: Solar Bench
3.1 Designing the Levels of Flexibility
3.2 The System
4 Conclusion
Acknowledgement
References
Evaluation of Factors Affecting the Process of Decision Making in Construction Site
Abstract
1 Introduction
2 Methodology
3 Case Studies
4 Findings and Conclusions
References
Economics, E-Business, Entrepreneurships
Techno-Entrepreneurship: Interdisciplinary Curricula Challenges for 4IR in Bosnia and Herzegovina
Abstract
1 Introduction
2 Techno-Entrepreneurship
2.1 Upgrading Triple to Quadruple Helix Concept
2.2 Domestication of the Techno-Entrepreneurship Curricula in Bosnia and Herzegovina (Case of University of Sarajevo)
2.3 Contextualisation of the Techno-Entrepreneurship Curricula in Bosnia and Herzegovina
3 Conclusion
References
Mechanism of Stimulate the Growth of Highly Competitive Technology Business
Abstract
1 Introduction
2 Materials and Methods
3 Results and Discussion
4 Conclusion
Acknowledgements
References
Methodology of the Formation of a Comprehensive Support Mechanism of Innovation and Investment Development in the Region
Abstract
1 Introduction
2 Materials and Methods
3 Results and Discussion
4 Conclusion
Acknowledgements
References
Global Gender Gap Index: Is It Time to Measure Technology Access Gap Also?
Abstract
1 Introduction
2 Technology Access Gender Gap as a Consequence of Horizontal Segregation
2.1 Choice of Educational Area
2.2 Professional (Career) Choice
2.3 Entrepreneurial Choice of Business Sector
3 Conclusion
References
Statistical Analysis of E-Government Development Index (EGDI) of Georgia
Abstract
1 Introduction
2 Data and Methods
3 Results and Discusions
4 Conclusion
Acknowledgment
References
Valorization of Montenegrin Lighthouses as Destination Icons Through Different Forms of Multimedia Arts
Abstract
1 Introduction
2 Valorization of Montenegrin Lighthouse Heritage
2.1 The Implementation of Multimedia Arts in Promotion of Lighthouse Heritage
3 Conclusion
References
Measuring Youth Attitudes on Materialism as a Consequences of a Consumer Society
Abstract
1 Introduction
2 Materialism as a Feature of the Consumer Society
3 Materialism and Youth
4 Methodology
5 Results of the Research
6 Conclusion
References
“What the Engineers Want” – Job Expectations of the Employees in IT Industry
Abstract
1 Introduction
2 Literature Review
2.1 Research Model and Hypotheses
3 Data and Methodology
3.1 Research Design and Measures
3.1.1 Dependent Variables
3.2 Results
3.2.1 Assumptions
3.2.2 The ANOVA Model Estimation
3.3 Interpretation of the Results and Discussion
4 Conclusion
References
Risk Management as a Part of the Business Process in Corporate Firms
Abstract
1 Introduction
2 Risk Management
2.1 Business System Development Life Cycle
2.2 Employee Roles and Responsibilities
2.3 Risk Assessment
3 Conclusion
References
The Application of PROMETHEE in Choosing the Best Promotion Service
Abstract
1 Introduction
2 Basic Elements of Decision Making Theory
3 Multicriteria Decision Making
3.1 PROMETHEE Method
4 Selection of Adequate Promotion Service for Sarajevo Canton’s Companies by Using PROMETHEE Method
5 Conclusion
References
New Technologies in the Financial Industry
Abstract
1 Introduction
2 Historical Context of Changing Modern Financial Industry
3 New Technologies in Financial Sector
3.1 Drivers of the FinTech
3.2 Market Participants in the FinTech
3.3 New Digital Technologies and the Financial Technology
3.4 Key Areas in the FinTech
3.5 Risks in the FinTech
3.6 Investments in the FinTech
3.6.1 FinTech in Major Regions of the World
3.6.2 FinTech in Bosnia and Herzegovina
4 Conclusion
References
Author Index