✦ LIBER ✦

CPW-fed-slot planar antenna for wireless applications

✍ Scribed by D. Tony; V. P. Sarin; M. S. Nishamol; C. K. Anandan; P. Mohanan; K. Vasudevan

Publisher: John Wiley and Sons
Year: 2011
Tongue: English
Weight: 517 KB
Volume: 53
Category: Article
ISSN: 0895-2477
DOI: 10.1002/mop.26315

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

A compact dual‐band antenna for wireless applications is proposed. The proposed antenna provides 2:1 voltage standing wave ratio (VSWR) impedance bandwidth of 590 MHz centered at 2.6 GHz and 3.09 GHz centered at 6.19 GHz. The antenna is fabricated on a substrate of dielectric constant 4.4 and thickness 1.6 mm, occupies an area of 36.9 × 18 mm^2^. Details of the proposed antenna design along with experimental and simulation results are presented. © 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett 53:2501–2504, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26315

📜 SIMILAR VOLUMES

Novel printed CPW-FED slot antenna for w

Novel printed CPW-FED slot antenna for wireless applications

✍ T. Shanmuganantham; S. Raghavan 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 824 KB

## Abstract A novel design of compact coplanar waveguide (CPW)‐fed slot antenna for wireless applications is presented. It can operate in the IEEE 802.11a frequency band from 5 GHz to 5.5 GHz. The antenna is designed on a RT/duroid 5880 substrate with a permittivity 2.22 and with the size of 18.8 m

Compact dual- and wide-band CPW-fed slot

Compact dual- and wide-band CPW-fed slot antenna for wireless applications

✍ Wen-Chung Liu; Feng-Ming Yeh 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 290 KB 👁 1 views

## Abstract A simple and compact coplanar waveguide (CPW)‐fed antenna for dual‐ and wide‐band wireless applications is presented. By properly embedding slots into a rectangular patch, the designed antenna thus fed by a CPW feedline and, with, including ground plane, only 24 × 25 mm^2^, can lead to

A CPW-fed band-notched slot antenna for

A CPW-fed band-notched slot antenna for UWB applications

✍ Chien-Wen Chiu; Chia-Shan Li 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 722 KB

## Abstract This article presents a band‐notched planar slot antenna presented to overcome interference with some already existing standards such as the IEEE802.11a and HYPERLAN/2 systems. The slot antenna, evolved from an elliptical aperture antenna, is fed by CPW with an elliptical tuning‐stub to

CPW-fed bow-tie slot antenna

✍ Jen-Fen Huang; Chih-Wen Kuo 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 281 KB 👁 1 views

A CPW-fed bow-tie slot antenna is presented. Experimental results show that the widest bandwidth can be adjusted by the slot width when the extended angle is zero, while the far field is in the broadside direction and the cross polarization is kept at a low le¨el. The ( ) bow-tie slot antenna can ob

Broadband CPW-fed wide slot antenna

✍ M. Miao; B. L. Ooi; P. S. Kooi 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 914 KB

A no¨el bow-tie slot antenna fed by CPW is in¨estigated. ( ) It is designed to work on a thick substrate h s 62 mil with a high ( ) dielectric constant s 10.1 . Two metal stubs are introduced at the r center of the bow-tie slot antenna to control the impedance matching and the cross-polarization le¨

CPW-fed octave band slot antenna

✍ Patnam Hanumantha Rao 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 102 KB 👁 1 views

## Abstract In this paper, a compact coplanar waveguide‐fed slot antenna that can operate over an octaveband (1.75–3.7 GHz) is presented. The novelty of this antenna is the wideband operation with the radial stub loading. The front‐to‐back ratio of the antenna with a back plate is better than 25dB