✦ LIBER ✦

Coupling of energy-dispersive and wavelength-dispersive spectrometers by use of a central computer with an electron microprobe analyser

✍ Scribed by Wintsch, W. ;Rose, M. R. ;Gloor, F.

Publisher: Springer-Verlag
Year: 1982
Weight: 900 KB
Volume: 77
Category: Article
ISSN: 0344-838X
DOI: 10.1007/bf01196757

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Detection of thin surface films by elect

Detection of thin surface films by electron beam microanalysis. A comparison between wavelength-dispersive and energy-dispersive microprobes

✍ Wendt, M. ;Krajewski, Th. ;Bimberg, R. 📂 Article 📅 1976 🏛 John Wiley and Sons 🌐 English ⚖ 541 KB

Characterization of the interphase in an

Characterization of the interphase in an aluminium/epoxy joint by using controlled pressure scanning electron microscopy coupled with an energy dispersive X-ray spectrometer

✍ Caroline Sperandio; Claire Arnoult; Abdelghani Laachachi; Jean Di Martino; David 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 698 KB

The aim of this work is to introduce the use of low vacuum scanning electron microscopy (LVSEM) coupled with an X-ray energy dispersive spectrometer (EDS) in the field of structural adhesives, more precisely aluminium/epoxy resin assembly. Such assembly is characterized by the creation of an interph

Degradation of system resolution by acti

Degradation of system resolution by activation of scanning coils in a combined transmission and scanning electron microscope equipped with an energy-dispersive x-ray spectrometer

✍ Norbert Roos; Tudor Barnard 📂 Article 📅 1983 🏛 Elsevier Science 🌐 English ⚖ 83 KB

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB