𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Corrosion fatigue of welded offshore steels and tubular connections

✍ Scribed by W.J. Oberparleiter

Publisher
Elsevier Science
Year
1985
Tongue
English
Weight
704 KB
Volume
4
Category
Article
ISSN
0167-8442

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Corrosion fatigue of spot-welded austeni
Corrosion fatigue of spot-welded austenitic stainless steels in 3.5% NaCl solution
✍ M. E. Somervuori; M. T. Alenius; H. E. Hänninen; R. Karppi 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 German ⚖ 611 KB

## Abstract Corrosion fatigue and fatigue properties of spot‐welded austenitic stainless steels EN 1.4301 and EN 1.4318 in 2B or 2F and 2H conditions were investigated in 3.5% sodium chloride (NaCl) solution and in air. The shear‐loaded specimens were single spot overlap joints. The effect of stee

Size effects in the fatigue behavior of
Size effects in the fatigue behavior of welded steel tubular bridge joints
✍ A. Nussbaumer; L. A. Costa Borges 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 379 KB

## Abstract Tubular space trusses for bridge applications use thick‐walled tubes. The reduction in fatigue resistance due to geometrical size effects is thus an important issue. In order to carry out a thorough study, both fatigue tests on large‐scale specimens and advanced 3D crack propagation mod

Corrosion fatigue of weld-bonded austeni
Corrosion fatigue of weld-bonded austenitic stainless steels in 3.5% NaCl solution
✍ M. E. Somervuori; M. T. Alenius; T. Kosonen; R. Karppi; H. E. Hänninen 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 German ⚖ 379 KB 👁 1 views

## Abstract Corrosion fatigue and fatigue properties of weld‐bonded and spot‐welded austenitic stainless steels EN 1.4301 and EN 1.4318 in 2B or 2F and 2H conditions were investigated. The corrosive environment was 3.5% NaCl solution at + 50 °C. In air the fatigue strengths of the weld‐bonded singl

Characterisation and corrosion of spot w
Characterisation and corrosion of spot welds of austenitic stainless steels
✍ M. Somervuori; L.-S. Johansson; M. H. Heinonen; D. H. D. van Hoecke; N. Akdut; H 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 German ⚖ 823 KB

## Abstract The corrosion resistance of spot‐welded and induction‐heated austenitic stainless steels EN 1.4301 and EN 1.4318 was investigated in 3.5% sodium chloride solution at ambient temperature. In potentiostatic measurements pitting corrosion of spot‐welded and induction‐heated samples occurs

Study of the fatigue behavior in welded
Study of the fatigue behavior in welded joints of stainless steels treated by weld toe grinding and subjected to salt water corrosion
✍ R. Baptista; V. Infante; C.M. Branco 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 871 KB

This paper presents the fatigue results obtained in two types of stainless steels: Duplex S31803 and Austenitic 304L. The main objective was to compare the fatigue behavior in terms of environment (air and 3% NaCl) and weld toe treatment (as welded and toe grinding). The tests were carried out in te