Compressive and shear properties of alginate gel: Effects of sodium ions and alginate concentration
β Scribed by LeRoux, Michelle A. ;Guilak, Farshid ;Setton, Lori A.
- Publisher
- John Wiley and Sons
- Year
- 1999
- Tongue
- English
- Weight
- 207 KB
- Volume
- 47
- Category
- Article
- ISSN
- 0021-9304
No coin nor oath required. For personal study only.
β¦ Synopsis
The equilibrium and viscoelastic properties of alginate gel crosslinked with Ca 2+ were determined as a function of alginate concentration and duration of exposure to physiologic concentrations of NaCl. Compressive and shear stress relaxation tests and oscillatory shear tests were performed to measure the material properties at two time periods after storage in NaCl compared to no NaCl exposure. The effect of concentration was determined by testing 1-3% alginate gel in a bath of physiological NaCl and CaCl 2 . After 15 h of exposure to NaCl, the compressive, equilibrium shear, and dynamic shear moduli decreased by 63, 84, and 90% of control values, respectively. The material properties exhibited no further changes after 7 days of exposure to NaCl. The loss angle and amplitude of the relaxation function in the shear also decreased, indicating less viscous be-haviors in both dynamic and transient configurations. All moduli, but not the loss angle, significantly increased with increasing alginate concentration. The observed decrease in compressive and shear stiffness for alginate gel after exposure to Na + was significant and indicated that physiological conditions will soften the gel over a time period of up to 7 days after gelation. The alginate gel retains significant solidlike behaviors, however, as measured by a loss angle of approximately 3Β°. This study provides the first available data for material properties of alginate gel tested in physiological saline.
π SIMILAR VOLUMES
## Abstract This article described a study on the gelβforming abilities of a number of different types of alginate fibers. The gelling abilities were assessed through the measurement on the release of calcium ions from the fibers and the absorption capacities in water and 0.9% saline solution. The
Sodium alginate formed-in-place membranes were formed on a macroporous titanium dioxide membrane substrate at pH 3.3,6.5, and 10.5. To investigate the rate and the mechanism of the membrane formation, the dependence of the pressure-to-flux ratio, P/J, on time, t, during the formation was evaluated u