✦ LIBER ✦

Comparative study of the effect of different nanoparticles on the mechanical properties, permeability, and thermal degradation mechanism of HDPE

✍ Scribed by K. Chrissafis; K. M. Paraskevopoulos; I. Tsiaoussis; D. Bikiaris

Publisher: John Wiley and Sons
Year: 2009
Tongue: English
Weight: 790 KB
Volume: 114
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.30750

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of different nanoparticles on the

Effect of different nanoparticles on thermal, mechanical and dynamic mechanical properties of hydrogenated nitrile butadiene rubber nanocomposites

✍ Anusuya Choudhury; Anil K. Bhowmick; Christopher Ong 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 572 KB

## Abstract Organically modified and unmodified montmorillonite clays (Cloisite NA, Cloisite 30B and Cloisite 15A), sepiolite (Pangel B20) and nanosilica (Aerosil 300) were incorporated into hydrogenated nitrile rubber (HNBR) matrix by solution process in order to study the effect of these nanofill

Effect of different film preparation pro

Effect of different film preparation procedures on the thermal, morphological and mechanical properties of pure and calcite-filled HDPE films

✍ Patit P. Kundu; Jagannath Biswas; Hyun Kim; Chee-Won Chung; Soonja Choe 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 387 KB 👁 2 views

The effect of hydrolytic and thermal deg

The effect of hydrolytic and thermal degradation on mechanical properties of industrial polyester yarns

✍ M. Sheikhzadeh; I. Ghaeli; E. Pirzadeh; F. Bateni 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 145 KB 👁 2 views

## Abstract For industrial polyester yarns, the study of hydrolytic/thermal degradation is important, because of the negative influence of these degradations on mechanical properties of polyester yarns. In this research, tensile force at breaking point and elongation at break were used to assess th

Effect of controlled crosslinking on the

Effect of controlled crosslinking on the mechanical and rheological properties of hdpe/lldpe blends

✍ Philip Kurian; K.E. George; D.Joseph Francis 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 228 KB

Comparative study on the effect of manch

Comparative study on the effect of manchurian ash and larch wood flour on mechanical property, morphology, and rheology of HDPE/wood flour composites

✍ Bin Li; Hongli Jiang; Lihua Guo; Hengchong Shi 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 380 KB 👁 2 views

## Abstract Effects of wood flour species and polyethylene grafted with maleic anhydride (MA‐PE) on mechanical properties and morphology and torque rheology of high density polyethylene (HDPE)/wood flour composites have been comparatively investigated. The results demonstrated that without compatbi

The influence of slag content on the mic

The influence of slag content on the microstructure, permeability and mechanical properties of concrete Part 1 Microstructural studies and basic mechanical properties

✍ Tarja Häkkinen 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 987 KB

The microstructural, permeability and basic mechanical properties of slag concretes made of neutral (CaO/Si02=l) and low alumina content (A1203=8.5%) slags were investigated. Alkali-activated slag concrete was studied by comparison with PC concrete and blended cement concrete. The reasons for the cr