## Abstract In this paper, a compact antenna operating in the GSM/DCS/PCS/IMT2000 quadโbands is presented. By bending the meandered monopole into three equal and perpendicular sections, then coupling the bent monopole with another strip monopole antenna, the designed novel antenna covers the requir
Compact planar monopole antenna with ground branch for GSM/DCS/PCS/IMT2000 operation
โ Scribed by Peng Sun; Zhenghe Feng
- Publisher
- John Wiley and Sons
- Year
- 2006
- Tongue
- English
- Weight
- 123 KB
- Volume
- 48
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
โฆ Synopsis
Abstract
A novel compact antenna operating at GSM, DCS, PCS and IMT2000 bands is presented. With a loosely coupled ground branch, the antenna covers all 2โG and 3โG wireless communication bands of GSM(890โ960 MHz), DCS(1710โ1880 MHz), PCS(1850โ1990 MHz), IMT2000 (1920โ2170 MHz). ยฉ 2006 Wiley Periodicals, Inc. Microwave Opt Technol Lett 48: 719โ721, 2006; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.21454.
๐ SIMILAR VOLUMES
## Abstract A novel planar monopole antenna capable of multiโfrequency operation at about 900, 1800, and 2450 MHz is presented. The monopole antenna occupies a small area of 6.5 ร 50 mm^2^, and is easy to construct with low cost by printing on an FR4 substrate. The monopole antenna can be mounted p
## Abstract This paper presents a novel planar monopole, printed on both sides of a dielectric substrate, which can be concealed within the housing of a folderโtype mobile phone as an internal antenna. The proposed internal planar monopole antenna occupies a small area of 10 ร 40 mm^2^, and is capa
The proposed internal antenna has a small thickness of only 3 mm, yet it is capable of providing two wide operating bands at about 0.9 and 2 GHz so as to meet the bandwidth requirements of the GSM/DCS/PCS/UMTS systems. Details of the design considerations of the proposed antenna are described, and t
## Abstract An innovative dualโfrequency planar invertedโF antenna (PIFA) mounted at the bottom end of the ground plane of a folderโtype mobile handset is presented. The proposed PIFA has a bent meandered radiating arm and is first printed on a flexible printed circuit board (FPCB), which is then b
## Abstract A novel dualโfrequency planar invertedโF antenna (PIFA) with a rolled radiating arm suitable for GSM (890โ960 MHz) and DCS (1710โ1880 MHz) dualโband operation is proposed. The radiating arm is first printed on a thin flexible printed circuit board (FPCB) and then rolled onto the surface