A compact, band-pass filter utilizing multi-element resonators, structured from sections of distributed transmission lines, is presented. A band-pass filter design procedure is established that emphasizes CAD techniques to characterize the individual resonators and to determine the resonator couplin
Compact odd-order band-pass filters using capacitively coupled spiral resonators
✍ Scribed by Nader Behdad
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 305 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
In this article, a new topology for designing compact, band‐pass filters of odd‐order (N = 3, 5, 7, …) is presented. The technique is based on using resonators with parallel RLC type resonance with high loaded quality factor (Q~L~) in conjunction with the capacitively loaded, slow‐wave transmission lines. Using the approach presented in this article compact band‐pass filters with bandwidths as small as 5% to as wide as 50% can easily be designed. The principles of operation of the proposed filter along with experimental results of several different fabricated prototypes are presented and discussed in this article. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 3172–3175, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23921
📜 SIMILAR VOLUMES
## Abstract A compact embedded tapped‐line combline filter with interdigital capacitors using low‐temperature co‐fired ceramic (LTCC) technology for wireless application is proposed. The interdigital‐type capacitors have been loaded to reduce the geometrical length while extending the electrical le
## Abstract In this letter, a dual‐band bandpass filter is proposed by consisting of spiral‐shaped microstrip resonators. Meanwhile, a skew‐symmetric tapped feed structure is applied to introduce two transmission zeros on both sides of individual passbands, and thereby improve the filter selectivit
## Abstract In this article, a new miniaturized configuration of single‐input‐single‐output dual‐band bandpass filter operating at ISM 2.45 GHz and UNII 5.8 GHz frequency bands using a multilayer structure with stepped‐impedance resonators is presented. A coupling aperture is introduced in a common
## Abstract In this article, compact microstrip bandpass filters using dual‐mode stub‐loaded resonators and capacitive/inductive source‐load coupling are presented to realize opposite asymmetric quasi‐elliptic responses. Two transmission zeros are generated in each design to sharpen the cutoff slop
## Abstract This article presents a new bandpass filter (BPF) with a broad‐side coupled triple split‐ring resonator (T‐SRR) using left‐handed metamaterial on a Teflon substrate.Then, by replacing the series quarter‐wavelength connecting lines with the equivalent T‐shaped line, a compact BPF with a