## Abstract **Summary:** Titaniaβcontaining coatings were prepared by cationic photopolymerization of an epoxy resin either by dispersion of preformed TiO~2~ nanoparticles or by their inβsitu generation through a solβgel dualβcure process. The kinetics of photopolymerization was evaluated by realβt
Characterization of nitrogen-implanted TiO2 nanostructured films
β Scribed by H. Zhou; T. Tesfamichael; J.M. Bell; K. Prince
- Publisher
- Elsevier Science
- Year
- 2006
- Tongue
- English
- Weight
- 402 KB
- Volume
- 126
- Category
- Article
- ISSN
- 0921-5107
No coin nor oath required. For personal study only.
β¦ Synopsis
Nanostructured tanium dioxide (TiO 2 ) films were implanted with N + at 40 keV and ion dose range of 10 16 /cm 2 to 4 Γ 10 16 /cm 2 , and annealed at temperatures between 673 and 973 K. From XRD and TEM analyses it was found that the anatase phase of TiO 2 remained stable up to annealing temperature of 973 K. The samples showed narrower XRD peaks corresponding to larger mean-grain sizes comparing to the un-implanted TiO 2 samples. The SIMS depth profile showed a peak of nitrogen concentration at about 60 nm beneath the film surface and this was confirmed using the SRIM-2003 program for simulating ion beam interactions with matter. The absorption spectra of the films as measured using spectrophotometer were found to shift toward longer wavelengths with the increase of ion dose.
π SIMILAR VOLUMES
Stress variations of semiconducting n-TiO, films prepared by anodic oxidation in concentrated alkaline solution are studied. The relationship between stress and photoelectrochemical response is investigated. The presence of sodium ions in the reticular lattice is found to be responsible for the part