𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Button antenna on textiles for wireless local area network on body applications

✍ Scribed by Sanz-Izquierdo, B.; Batchelor, J.C.; Sobhy, M.I.

Book ID
114444031
Publisher
The Institution of Engineering and Technology
Year
2010
Tongue
English
Weight
696 KB
Volume
4
Category
Article
ISSN
1751-8725

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Monopole antenna based on the modified g
Monopole antenna based on the modified ground plane for wireless local-area network application
✍ Wen Jiang; Shu-Xi Gong; Song-Tao Yu 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 298 KB

## Abstract A monopole antenna with modified ground plane is presented for 2.4 and 5 GHz wireless local area network applications in this article.A trapezoid patch and a quasifractal slotted patch are printed on two FR‐4 dielectric substrates as the radiator and the ground plane of the antenna, res

Double dipole antenna for dual-band wire
Double dipole antenna for dual-band wireless local area networks applications
✍ Johanna M. Steyn; Johann W. Odendaal; Johan Joubert 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 705 KB

## Abstract A double‐dipole antenna design is proposed for wireless local area network (WLAN) applications. Two parallel dipoles are used to facilitate operation in both the standard WLAN frequency bands (IEEE 802.11b and IEEE 802.11a) simultaneously. The lower band dipole is rhombus shaped and rad

Dual-band square slot antenna with embed
Dual-band square slot antenna with embedded crossed strips for wireless local area network applications
✍ Jia-Yi Sze; Wei-Shan Chang 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 175 KB

## Abstract A new compact microstripline‐fed square slot antenna with embedded crossed strips is proposed for dual‐band wireless local area network (WLAN) applications. Connected to the two upper inner corners of the slotted ground, the crossed strips can extend the path of the current distributed

Tri-band printed sector-shaped slot ante
Tri-band printed sector-shaped slot antenna for wireless local area network/worldwide interoperability microwave access applications
✍ Qiu-Yi Zhang; Rui-Hua Zeng; Qing-Xin Chu 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 924 KB

## Abstract In this article, a tri‐band‐printed sector‐shaped slot antenna with better band‐rejected characteristics within the band of 4–5 GHz is presented. By using a pair parasitic elements along the microstrip feed line, wideband performances can be achieved, and then, with use of two strips pe

Broadband coplanar waveguide-fed slot an
Broadband coplanar waveguide-fed slot antenna for wireless local area networks and microwave imaging applications
✍ Mohammod Ali; Ashit Tailor 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 605 KB

## Abstract A broadband CPW‐fed semicircular slot antenna is proposed for 2–6 GHz WLAN (wireless local area networks) and microwave imaging applications. The total dimension of the bidirectional slot antenna is 80 mm by 50 mm and is designed on a 0.5‐mm‐thick Duroid 5880 substrate (dielectric const