𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Broadband characterization of high-dielectric constant films for power-ground decoupling

✍ Scribed by Obrzut, J.; Noda, N.; Nozaki, R.

Book ID
114629114
Publisher
IEEE
Year
2002
Tongue
English
Weight
272 KB
Volume
51
Category
Article
ISSN
0018-9456

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Dielectric properties characterization o
Dielectric properties characterization of high dielectric constant thick films
✍ Luciene S. Demenicis; JosΓ© Ignacio Marulanda; Rodolfo A. A. Lima; Maria Cristina πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 717 KB

## Abstract A technique for the characterization of microwave dielectric properties of high dielectric constant thick films at room temperature is proposed, using multilayered coplanar waveguide transmission lines with high dielectric constant thick films deposited over the lines.Besides the simpli

A CPW linear resonator method for the mi
A CPW linear resonator method for the microwave characterization of high dielectric constant films
✍ Luciene S. Demenicis; Rodolfo A. A. Lima; Luiz Fernando M. Conrado; Walter Margu πŸ“‚ Article πŸ“… 2007 πŸ› John Wiley and Sons 🌐 English βš– 186 KB

## Abstract A coplanar waveguide linear resonator technique for the experimental characterization of the dielectric properties of films in the microwave frequency range at room temperature is proposed. The approach is simple to implement as it consists of a film with unknown high dielectric constan

Experimental characterization of a plana
Experimental characterization of a planar transmission-line transformer in multilayered high dielectric constant film structure
✍ Luciene S. Demenicis; Luiz Fernando M. Conrado; Walter Margulis; Maria Cristina πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 528 KB

## Abstract This article describes the complete experimental characterization of a 10‐mm long planar transmission‐line transformer (TLT) in a multilayered high dielectric constant film structure. The multilayered configuration was obtained by deposition of a high dielectric constant BaTiO~3~ (BTO)