𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Anodic behaviour of indium in sodium chloride solutions

✍ Scribed by S.B. Saidman; J.B. Bessone

Publisher
Elsevier Science
Year
1991
Tongue
English
Weight
805 KB
Volume
36
Category
Article
ISSN
0013-4686

No coin nor oath required. For personal study only.

✦ Synopsis

Passive 8hn growth, electrodissolution and pitting corrosion of iridium electrodes in NaCl solutions in the pH range 2-12.6 were studied using potentiostatic and potentiodynamic techniques complemented with SEM. In the pH range between 10.5 and 12.6 the oxide formation should involve a mixed control, a surface reaction plus a diffusion process. On decreasing pH the process becomes more complex due to the formation of In(I). The effect of chloride ions upon the active and passive behaviour of indium has been determined. Chloride ions in neutral and alkaline solutions produce pitting at potential values more. positive than those of the active-passive transition. Localized corrosion appears to be under a competitive surface mechanism involving the formation of the passive film and the nucleation and growth of an indium chloride salt layer.

πŸ“œ SIMILAR VOLUMES

Anodic polarization of platinum in sodiu
Anodic polarization of platinum in sodium chloride solutions
✍ E.L. Littauer; L.L. Shreir πŸ“‚ Article πŸ“… 1966 πŸ› Elsevier Science 🌐 English βš– 775 KB

The anodic behaviour of platinum in sodium chloride solution bas been studied, It has been shown that below about l-6 V, chlorine evolution occurs on a clean platinum surface but above this potential, a surface oxide develops on the electrode and a rapid potential jump occurs. The kinetics involved

Anodic behaviour of iron in alkaline sol
Anodic behaviour of iron in alkaline solutions
✍ T. Hurlen πŸ“‚ Article πŸ“… 1963 πŸ› Elsevier Science 🌐 English βš– 537 KB

AImract--Galvanostatic experiments have been made on iron electrodes in hydrogen-poor and hydrogen-saturated alkaline solutions at 20Β°C. Emphasis was on the active behaviour of iron, but attention was also paid to its passivation. The mechanism of the anodic dissolution of active iron is found to b

Anodic behaviour of vanadium in acid sol
Anodic behaviour of vanadium in acid solutions
✍ S. HornkjΓΈl; I.M. HornkjΓΈl πŸ“‚ Article πŸ“… 1991 πŸ› Elsevier Science 🌐 English βš– 428 KB

The anodic behaviour of vanadium in acid solutions was studied in the presence of various anions and cations. Vanadium shows active hehaviour in all the solutions tested, except for some barium containing ones at pH >4, in which the metal is passivated at potentials positive to 0.09 V&e). It is foun

The anodic behaviour of tin in alkaline
The anodic behaviour of tin in alkaline solutionsβ€”I. 0Β·1 M sodium borate solution
✍ S.N. Shah; D.Eurof Davies πŸ“‚ Article πŸ“… 1963 πŸ› Elsevier Science 🌐 English βš– 730 KB

When an oxide-free tin surface is anodically polarized in deaerated 0.1 M sodium borate at a c.d. of about 6 #A/cm ~ the potential of the tin remains constant at first at --0-85 V vs. Ag/AgCI. Half the current is used for oxide formation and half for tin dissolution. This process continues even when